Jump to content
SAU Community

Recommended Posts

Hi Guys,

Im not sure how long this has been happening, but im wagering a while. Basically i have a M80 installed with the window raisers. When i set the alarm, my car doesnt lock. I can use the key to lock the doors, but i was under the impression that R33's have central locking with the button?

Anyway, its a pain in the arse, im guessing that its just a disconected wire somewhere along the system, but i dont know much about how alarm's and central locking systems work. If anyone could give me a couple idea's of what the problem might be and how to fix it, that would be appreciated, otherwise ill get my mechanic to have a look.

Oh and i tried the search button, only found a couple threads with alarm issues, but from what i could tell, none with the same problem as mine.

Thanks,

Link to comment
https://www.sau.com.au/forums/topic/247618-alarm-and-central-locking/
Share on other sites

Sounds like your drivers side lock actuator has died. I know the one for the R32 GTR is about $70 new.

Give this guy a call, he owns a R33 GTR of his own and knows them inside out (also did my alarm install on my R32).

Aarons Car Accessories

0414 865360 / 8351 5553

could be NSW.

if you are handy with a meter prod the actuator with it and arm/disarm the alarm. it will be a fuse on the alarm or the actuator. I'm leaning on the actuator.

yeah im in NSW, i read on another thread that the actuator was the problem with the passenger side door. I have this problem with both sides, neither lock. Might get someone to have a look at it, better then me doing a bodgy job.

Thanks for the ideas though guys.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
×
×
  • Create New...