Jump to content
SAU Community

Link Ecus

Craney

By Craney,
in Engines & Forced Induction

 Share

Recommended Posts

Craney Contributor

Craney

Posted
Posted

Got a R34 gt-t atm that has a microtech hard wired to it and after having lots of issues with black smoke and generally running bad i went to vern at dynolink in townsville. Got it running heaps better but still not 100%, he recommended switching to a Link ecu for better boost control and other nifty stuff. Just wondering if anyone has had much experience with this brand of ecu and whether it worked well for them.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/247758-link-ecus/
Share on other sites
Lithium Grand Master

Lithium

Posted
Posted
Got a R34 gt-t atm that has a microtech hard wired to it and after having lots of issues with black smoke and generally running bad i went to vern at dynolink in townsville. Got it running heaps better but still not 100%, he recommended switching to a Link ecu for better boost control and other nifty stuff. Just wondering if anyone has had much experience with this brand of ecu and whether it worked well for them.

Although from what you are describing the tuner is quite possibly to blame for your problems, for informations sake I am running a now phased out base model version of the plug in Link (GTSLink) and my car runs really well with it - the new G4 series links are very very good, there are a lot of "high end" track/drift/drag and street cars in NZ running them already and tuners/owners alike sound very happy with them so far.

Link to comment
https://www.sau.com.au/forums/topic/247758-link-ecus/#findComment-4301597
Share on other sites
STATUS Grand Master

STATUS

Posted
Posted (edited)

^^^ agreed the link is very good, i have ahd no issues so far and they are worlds above many of the other ecus at the same price, in fact i like the link better than haltech. The link cant be too bad as other respected ecu gurus now sell them as vipec.

Edited by URAS
Link to comment
https://www.sau.com.au/forums/topic/247758-link-ecus/#findComment-4301655
Share on other sites
Fastrotor Proficient

Fastrotor

Posted
Posted

i believe your microtech is an older MTX model without even "Matrix" mode ..... ie it has 15 odd load points , no rpm correction except WOT RPM off set ... and cruise corrections ..... IE Bloddy hard to make a nissan run nice with......

I currently run the original GTSLink also , but am awaiting arrival of the new G4 plugin to replace it.

The new links are a pleasure to tune, and have some really great features..... Either way you wont know your car afterwards ! Terrific investment.

Gary

Link to comment
https://www.sau.com.au/forums/topic/247758-link-ecus/#findComment-4303633
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      Hi everyone.

      By Marek · Posted

      Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...