Jump to content
SAU Community

Recommended Posts

from teh depths of memory

HR31 theres two types of terbs

Nics a 33mm inducered plain bearing ceramic shitter

eccs 43mm inducered plain bearing ceramic

Silver theres two types also

R32 43mm inducered ball bearing ceramic

laurel/cefiro 43mm inducered plain bearing

Bam you talking S13 red top and S13 black top ... both t25g

or the black top vvt from s14 ? t28

Originally posted by MrMayhem

Bam you talking S13 red top and S13 black top ... both t25g  

or the black top vvt from s14 ? t28

u know how the S13 comes with the redtop but the 180sx Type X comes with the black top? which is better? heard the redtop is faster?

Don't suppose you have a definitive list of the differences between the R32 RB20 and the Ceffy RB20. I assumed (first mistake I suppose) that they were the same... So even an R32 Turbo would be considered an upgrade?

the bb would be a time consuming not real rewarding upgrade

so far

- cas (eccs hr31)

- ignightor (hr31)

- tps (hr31)

- afm (eccs hr31)

- terbs (same as teh 32 bar no balls)

-(rumour is the mapping in teh ecu is different but i cant say for sure)

Sometimes Ceffys have 32 conversions though throwing all teh formentioned into meaninglessness...ness.

Your Ceffy appears to be a fine bit-o-gear

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...