Jump to content
SAU Community

Recommended Posts

Hi guys, im wrecking a 1992 R33 s1 5 speed gtst.

car has damage to the front and rear passengers quarters from someone doing a U turn infront of the previous owner

so the car is complete minus front passengers side guard and headlight, bonnet, front bar and stock intercooler

Its stock apart front having a turbo timer, 3 inch straight through cat back exhaust, 17s and lowered springs

its currently running and driving fine (had to do some funky intake piping to delete the non existant cooler), so for anyone interested in the engine or box it can be test driven

Engine has 110,000 Ks one it and has only ever seen stock boost

Gearbox was rebuilt just before the previous owner got the car and he had reciepts for it, but unfortunately didnt keep them. so the box has had around 6 months of driving on it since it was rebuilt

would like around $3200 for engine and box with all accessories and stuff to pretty much make the engine run, im negotiable on the price and whats included with it

Brakes and 5 stud stuff

Front and Rear calipers with pads and lines

front and rear rotors, measuring 29mm thick front 17mm thick rear

all drum handbrake stuff with cables

front and rear hubs

bm44 non abs master cylinder

all in good working order

$1200

wheels are WEDS brand 17x8 front and 17x9 rear with +38 offset all round. front tyres are 235 45 17s and about 80-90% tread rears are 255 40 17 and are about 90%. and the front rims are 4/5 multi stud

would ideally like to sell engine and box before i sell anything that will stop the car being driveable just incase someone really wants a test drive

Located just outside of geelong, vic

happy to post anything that australia post will take

PM or reply here with what you want or if you want more pics or anything

cheers

Nick

will get more pics of the interior and stuff tomorrow if i can find the camera

post-54410-1229331456_thumb.jpgpost-54410-1229331488_thumb.jpg

post-54410-1229331524_thumb.jpgpost-54410-1229331559_thumb.jpg

post-54410-1229331601_thumb.jpgpost-54410-1229331621_thumb.jpg

post-54410-1229331639_thumb.jpg

post-54410-1229331581_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/248999-wrecking-s1-r33-gtst-5-speed-vic/
Share on other sites

  • Replies 64
  • Created
  • Last Reply

Top Posters In This Topic

hav you sold all the plastics from the gear surround up to the top of dash? (around climate control etc)

nope, all of that is still there. was supposed to sell the gearstick surround with the full manual conversion but havnt heard back from the guy that was interested

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
×
×
  • Create New...