Jump to content
SAU Community

Recommended Posts

A bloke told me that there is a different level of complaince if you import a car yourself to if an importer imports one and that i wouldn't be able to register a car thats been imported privatly?

or once its complied thats it? the car im talking about is already registered in a different state

sorry if i missed this in the search

Link to comment
https://www.sau.com.au/forums/topic/249153-different-levels-of-compliance/
Share on other sites

the Bloke must have been talking about a persoanl import these cars are owned by someone more than 12months overseas and are allowed in under the personal import Scheme not RAWS so the only go thru an Engineers certification and mod plated to be allowed to register this differs for all states . this would mean if you moved interstate it may need to be rechecked and signed off by an engineer from that state.

In the Case your question is asking if you are a private person importing or a dealer imports a vehicle unders the Raws system they are all complied axactly to a national standard set by raws and would be able to register in any state.

So really you need to find out if the car was a personal import or a Raws complied car. for your own information Personal imports have a yellow type Id plaque stating the vin and personal import. for old Raws complied cars they are green ID plate and in the last time raws went crazy they changed it to purple colour with all details of raws compliance workshops name and Vin # etc ..

ask the seller for a photo of the import plate it should clearly state what type of import it is.

Hope this helps

Regards, Phil

Ahh that makes sense now thanks mate! im pretty sure he didn't own it for 12 months over there he just imported it, i'll get a photo of the import plate but i can see a purple plate in the engine bay pic i have, can't read any numbers though

thanks for your help

edit so it doesnt matter what the numbers are on the purple plate as long as its purple? see attached link for pic

http://img246.imageshack.us/img246/9347/dscengineax1.jpg

Edited by byebye

to be honest I would ring the relevant office in your state and state your case.

I own a personal import that I bought from interstate and for me (qld) it was a case of going to QT and registering it.

You don't need SEVS compliance, that personal import compliance plate is a federal scheme, so it's already qualified to be in the country.

Here in VIC, you'd need an engineer's certificate, I think NSW is the same. SA you just take it to regency I believe.

Anyways, like Chris said, check with your local state road agency to find out what you need to register a personal import (yellow plate).

cheers,

David @ Carizma

So i would have to get it complied to change states
  • 1 month later...

In relation to imports, I had a look at this site:

http://www.tradecarview.com/used_car/japan...?ps=25&so=2,

It provides a shipping estimator and Freight courier. I looked at the Skylines, Wrx and Evo's which are resonably priced.

I have no experience in this field and would like to know how much hoops do i have to jump to get this vehicle on the road in NSW ie RTA. Would i need engineers certificates or what ever cerificates ??????.

Some nice Imports in Japan, what are your thoughts.

Do a search on tradecarview and you'll find out what the general consensus is >_<

Aside from just being a place were dealers list their cars it is also were lazy arse people cut and paste images from and state it is some ones stock that supplies to them but half the time it is just some cheap piece of shit sitting in a dealers yard somewhere in Japan.

what are the requirements for xenon headlights and front windscreen replacement in regards to compliance?

i looked at a car from a backyard dealer who couldn't speak English very well and i'm sure he said that he doesn't bother removing the xenons or replacing the windscreen (although he said he was meant to) for compliance.

any help appreciated.

The headlights are supposed to be modified to accept H1 globes.

Windshield is usual part no. M1G4 for the 34 coupes, there could be others that pass the ADR as well, haven't seen the evidence recently.

Both headlights and windscreen have to be roadworthy as well of course, which is where you're more likely to run into problems rather than with the compliance of them.

David @ Carizma

what are the requirements for xenon headlights and front windscreen replacement in regards to compliance?

i looked at a car from a backyard dealer who couldn't speak English very well and i'm sure he said that he doesn't bother removing the xenons or replacing the windscreen (although he said he was meant to) for compliance.

any help appreciated.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hello, just just bought an 1999 enr34 with a stock rb25neo and I'm looking to upgrade the engine to 500whp I know some basic things but wondering if there are things I'll need to do to upgrade the stock block and all the bits and pieces to achieve this.
    • Thanks everyone for the replies and suggestions. Got the seats out (hoping I could find some existing grommets but no such luck). By tapping and measuring etc. I could figure out where I could drill through if needed. But first I borrowed an inspection camera and managed to go through factory holes in the chassis rail and could see that the captive nut was holding steady which is why it could retighten. So it was indeed a stripped section of thread, so I applied downforce by levering the bolt head with a screwdriver and went slowly back and forth until it came out. Camera helped a lot cos I could monitor that the captive nut was holding tight. Now I just have one very seized main subframe nut to tackle 😅
    • BOVs do have a purpose, if you ever log pressure before and after the throttle body, you will see a spike pre throttle on lift off from a WOT condition. Enough to bend throttle blades / damage e-throttle motors or simple assist in blowing off cooler pipes. FWIW, the above on really applies to those running at least 2 bar of boost. OP shouldn't have an issue, on the other hand, here are some videos of my shit box over a decade ago with some succulent dose with the airbox on and off. That shit box is unrecognisable these days 🫠    
    • I've tried all different combinations of BOVs/ no BOV and stock bypass valves over the years, on gear changes the stock bypass valve seems to get the car back on boost quicker because in part the turbos wheel speed isn't being slowed down by reversion, although they have issues holding boost much over the stock setting. Most aftermarket BOVs you can adjust the spring, tighter will make it open later and close sooner, but in my experience it'll cause a bit of flutter at low load/rpm anyway. I've also got some input into this whole no bov causing turbo wear, never had an issue on any on my turbos HOWEVER, I got my R33 GTST with 200k kms on it, with from what I can see still has the original turbo, no lateral shaft play but has about 4-5mm of play in and out which to me seems like a worn thrust bearing from years (100-150k kms?) of turbo flutter running no bov, so maybe there is some truth to it in the long run. But that'll never stop me loving the Stutututu while I have the car.   OP just wants to know if he can run a atmo vented BOV with no major issues and the answer is YES, plenty of people do it, there's no harm in installing it and seeing how it runs before spending $$$ on an aftermarket ecu, last time I bought a Nistune it was $2400 for install and a tune , unsure of todays prices but you get me. Crazy money to spend just to fix the minor inconvenience of stalling that can be overcome by letting the revs come down to near idle before putting the clutch in or a little bit of throttle to avoid it. You're better off leaving the ecu and tune for after a bigger turbo/injectors have been installed to take full advantage of the tune and get your moneys worth.   Let OP have his Whoosh sound without trying to break his bank haha
    • I see you missed the rest of the conversation where they have benefits, but nothing to do with avoiding breaking turbos, which is what the aftermarket BOV made all the fan boys, tuners, and modders believe was the only purpose for them...
×
×
  • Create New...