Jump to content
SAU Community

10.61 1/4 Mile. First Day At Track !

95GTR600

By 95GTR600,
in Engines & Forced Induction

 Share

Recommended Posts

95GTR600 Collaborator

95GTR600

Posted
Posted

Thanks guys for all the information on the forum. ( I used a lot the SEARCH button)

I am very happy with the performance of our GTR R33. First day at the 1/4 mile track we run 4 passes 11.4, 11.0, 10.82 and 10.61

We run with SUNOCO Race Fuels GT PLus 104 octane unleaded.

The car is a single turbo power FC +600whp tunned by Cristian Penson @

C-WORKS shop sponsored by Zero Wheels and omegaxenon.com

And after the first visit to the track it become the fastest Nissan in Dominican Republic.

We look foward for better times on 2009. :banana:

Link to comment
https://www.sau.com.au/forums/topic/249485-1061-14-mile-first-day-at-track/
Share on other sites
R31Nismoid Grand Master

R31Nismoid

Posted
Posted

440rwkw will throw you deeper mate, keep the R&D going with that power as there is still faster ET's to be had!

Great work!

What turbo/tyres outta interest?

Im guessing GT35 if your running 104, a a T04Z should do that on 98 (whever the equiv is over there)

95GTR600 Collaborator

95GTR600

Posted
  • Author
Posted (edited)
440rwkw will throw you deeper mate, keep the R&D going with that power as there is still faster ET's to be had!

Great work!

What turbo/tyres outta interest?

Im guessing GT35 if your running 104, a a T04Z should do that on 98 (whever the equiv is over there)

The car makes 600whp on a 4 wheel dyno.

Borg Warner S300 series single turbo conversion.

4 slicks tires 26"

Edited by 95GTR600
R31Nismoid Grand Master

R31Nismoid

Posted
Posted

what are your 60ft time on slicks?

440rwkw has seen very low 10s on semi's, not full slicks...

Get that 60ft down (which is where i expect your loosing the time) and see a 9 without a doubt on slicks

95GTR600 Collaborator

95GTR600

Posted
  • Author
Posted
what are your 60ft time on slicks?

440rwkw has seen very low 10s on semi's, not full slicks...

Get that 60ft down (which is where i expect your loosing the time) and see a 9 without a doubt on slicks

first 1.59

best 1.50

Strik3r Experienced

Strik3r

Posted
Posted

There is an easy gain if you can grab second before you hit limiter.. sounds like it bounced of it at least 2 times.. thats gotta be worth .1 of a second. Keep up the good work! Out of curiosity, whats your response like with that turbo compared to say, a Garret t04z which is in the same power range.

95GTR600 Collaborator

95GTR600

Posted
  • Author
Posted (edited)
There is an easy gain if you can grab second before you hit limiter.. sounds like it bounced of it at least 2 times.. thats gotta be worth .1 of a second. Keep up the good work! Out of curiosity, whats your response like with that turbo compared to say, a Garret t04z which is in the same power range.

You are right, it was my first time running a RHD car... but I agree with you about hit limiter.

I love the Borg Wagner turbo...a friend has one Honda producing 800whp @ 36 lbs of boost.

We got full boost at 5,200rpms.

We will try to make things better next time.

Edited by 95GTR600
95GTR600 Collaborator

95GTR600

Posted
  • Author
Posted
what are your 60ft time on slicks?

440rwkw has seen very low 10s on semi's, not full slicks...

Get that 60ft down (which is where i expect your loosing the time) and see a 9 without a doubt on slicks

What should be a decent 0-60 ft ?

Do you think factory rear differential will hold the power ?

  • 2 weeks later...
95GTR600 Collaborator

95GTR600

Posted
  • Author
Posted (edited)
Nice work, is it S362 or bigger? Going by that dyno power and trap speed I am guessing it was tuned on a hub dyno or something?

it's a S372 with a S400 label. I did not understand well about it. But I am very happy with the turbo and the whole car.

We look foward for better times when the track is open again.

Does anyone knows what we have to do in order to make 1.3x on 0-60f with slicks ? Which way to do a good burn out without damage the case, etc. ?

Edited by 95GTR600
Lithium Grand Master

Lithium

Posted
Posted
it's a S372 with a S400 label. I did not understand well about it. But I am very happy with the turbo and the whole car.

We look foward for better times when the track is open again

Damn mate thats a big turbo you have there, and pretty good spool for a turbo of that size too - probably got more in it :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • sonicii
      Could it really happen......

      By sonicii · Posted

      I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • MBS206
      Could it really happen......

      By MBS206 · Posted

      Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • MBS206
      R34 25GT Engine Light 21

      By MBS206 · Posted

      Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...