Jump to content
SAU Community

Recommended Posts

CPU is clockable, but you might want to update the graphics card.

We had talked a little while ago about massive price drops on the current range of high end cards as dx11 is due prob early next year in which case if you can hold out you could a $600 card now for close to half price. Could be worth the wait.

Only paid $40 for the 8600GT, there's no real point in buying more PC parts because I've nearly finished building my xbox 360 (plus I can play Crysis on medium in a decent resolution lol). I was going to get a 9600GT, but for the amount of games I'm playing on the PC these days there wasn't much point.

I currently have the Engine set on the video card to 600mhz, the Shader to 1250, and the RAM to 850, running nice and stable so far.

When it's time for a DX11 card I'll probably just build a new box and get rid of my laptop.

DX11 will be only coming 'in' 4-6 months after DX11 comes out before you can actually make use of it.

So that will be 2010. Hence i just grabbed a 4890 for now... sit on that till Q1 or Q2 in 2010, then upgrade again by which stage the initial 'release' prices will have fallen nicely and 2nd Gen cards will be coming out too

ATi are apparently on track for DX 11 with Win 7. So once ATi and nVidia have DX11 cards I'll get some new ones, nothing to do with DX11 they just happen to be the next gen of cards.

FYI the 8600 is a dog turd of a graphics card as it's memory bus is tiny so no matter how high you OC it's hobbled.

Edited by DivHunter

Ye, true Jacob - although im just gonna wait, dont need anything greater than a 4890 at present

^ the Sapphire one is a waste of $$.

Buy a standard one and it'll clock to 901mhz.

I have the PCS+ 950mhz and better cooling, ok so far but wont clock any higher, so i need to investigate how much voltage its running in the next day or two

Talking about GFX cards....

If you have OC'd your graffix card and you are using RivaTuner DONT UPDATE TO THE LATEST NVIDIA DRIVER.

Long story short the new driver is not supported by Riva Tuner as yet and the latest riva tuner is still close to a month away

So all my clocking of my 9800GTX has now gone :-(

There are some work arounds but generally they only change the fan settings under load NOT the OC itself.

Quite annoying really.

Hey guys,

Just wondering if you could give me some ideas for a new media PC i want to get going. Got a fancy new TV so i want to be able to record tv easily using webscheduler etc as well as browse the net and network the TV.

I'd like to get out of it as cheaply as possible but also want a computer that can run HD TV nicely and a few apps at once. Main things I want is -

- minimum 1Tb HD

- GFX card with HDMI/VGA output

- Dual TV tuner, preferably with one analogue tuner but not essential

- Plan on running windows 7 as an OS, and want fast start up time etc

Obviously i need a psu, mobo, cooling etc to support that stuff but i'm not too sure what i will need. Also a nice small case would be good as it will sit near the TV. Would you guys have any suggestions as to whether i'd be best looking at some second hand gear, or just get all new, and if so, whats the best to go for these days?

Ye, true Jacob - although im just gonna wait, dont need anything greater than a 4890 at present

^ the Sapphire one is a waste of $$.

Buy a standard one and it'll clock to 901mhz.

I have the PCS+ 950mhz and better cooling, ok so far but wont clock any higher, so i need to investigate how much voltage its running in the next day or two

Did you try and OC the PCI Express bus?

you're lucky :D

I'm not willing to bet a HDD of data or similar on possible corruption setting it about 100Mhz, some people will when benching and using DICE and so on...

Especially not once i stick my raid0 setup together lol

I've had not problems with pushing it between 100-110 on my X38 mobo running X48 Rampage BIOS.

I've used the P5E and the Rampage Formula and they both can run 110 pretty easily however other boards don't like it at all and can also kill your cards. Especially non-grpahics cards in the PCI-e slots.

To give you an idea

E5200 - $90

500GB HDD - $70

4GB DDR2 - $60

Thermaltake VK81221N2 - $150

Tuner Card - $45

DVD-RW - $25

Mobo - $115

Total $555

So if they are charging $600 that's a pretty good price for that. Although I'm not sure how it would go playing HD stuff to be honest, and that is where everything is heading so IMO you'd might as well build for it as its not that much more

To give you an idea

E5200 - $90

500GB HDD - $70

4GB DDR2 - $60

Thermaltake VK81221N2 - $150

Tuner Card - $45

DVD-RW - $25

Mobo - $115

Total $555

So if they are charging $600 that's a pretty good price for that. Although I'm not sure how it would go playing HD stuff to be honest, and that is where everything is heading so IMO you'd might as well build for it as its not that much more

Thanks for the price comparison - they are some very competitive prices.

Regarding the HD, thats one of the reasons I thought I'd ask here - from what i've read, most modern budget systems are more than capable of HD stuff and anything more is overkill... any more thoughts on that?

Dude, you should be fine with Full HD content on that system. My current media pc is an old Athlon 64 3500+ with 2gb DDR400 ram. With an old 7900gtx graphics card. I can play full hd content no worries(1080p if only program running, and 720p with a few programs running). Bare in mind my system has been slimmed down considerably, but with the advantages of a faster and more effecient setup like yours, you shouldn't have any problems at all.

Best of luck

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hang on. Let me get this straight. The desire is to have coilovers, BC in particular, to be MORE comfortable on Sydney roads than stock suspension? Well, that's obviously not right. BCs have crude damping design at the very best, and typically hard spring rates. BC stands for Billy Cart. And then, the desire is to put in some shitty old worn out stockers, to get it blue slipped and then put the BCs back in? And then.....what? Not worry about getting pulled up by the Plod? Because you seem to have raised a worry about paying for engineering (which actually does solve all your legality problems) and still getting pulled up.... but the only problem there is that if/when that happens you have to show your paperwork at the inspection station. Whereas, if you just swap in borrowed shitty old stockers to get it slipped now, and then you get defected in the future, you have to go find more shitty old stockers then too. You course of action looks like this set of options: Buy brand new stock type dampers, and springs. probably cost a bit more than $1k all up, but will last for the remaining life of the car. Put them in, pass inspection, drive on them forever more. Hell, they could even be really nice Bilsteins and Kings or other lower&stiffer springs if you wanted. Get the car engineered as is. ~$1k. Buy new Shockworks coilvers (or MCA) and also pay for engineering. You're spending a lot more here. But these will be the best things that you could drive around on.
    • Might be worthwhile hitting up Facebook's groups, I know most of them contain terrible people and scammers - however you might be able to find someone that's in Sydney with factory suspension you could purchase and/or hire. Just do not send any form of money anywhere, in person cash only.
    • Thanks @Duncan Ride height is fine. I think it's almost stock tbh. Happy to share a pic. I don't actually have a regular mechanic as haven't lived in Sydney too long. Could you or anyone recommend any shops in Sydney?
    • You just need a different blue slip shop (preferably one you regularly use as a mechanic), and make sure the coil overs are as close as possible to standard height
    • yeah the sugar refining companies were pushing for the same in Oz originally, all fuels were going to have 10% ethanol to make them "cheaper" (noting, that the loss in l/100 might be greater than the decrease in price). I guess they won that fight in Canadia
×
×
  • Create New...