Jump to content
SAU Community

Recommended Posts

what ever NTSC feed you want. if you get tricky you can auto swtich the thing when you go to reverse and bck again.

look for a C1,C2 line on the rear or the MFD. that will be a start.

yep that flickering is what happens when it is in PAL mode, so make sure that whatever you want to connect up can do NTSC output on the composite.

mine flickers and is in B&W when the headunit outputs to PAL. fortunately my headunit can switch so whatever you get make sure it can do it in NTSC. Otherwise the quality on the MFD is not too bad, certainly watchable. The cable made things a lot easier thanks to Chris :)

I just bought a 12v reverse camera on eBay.

I'm gonna draw power from the reverse light, so then everytime I put my car in reverse, the camera would power up, then I'll connect the RCA output to the Clarion loom that I got. But I'll have to manually push the TV button to see.

I guess if it does get annoying, I'll find the C1, C2 lines as you mentioned, to make it auto switch :)

Coz I guess I don't ALWAYS need the reverse cam :D

EDIT: Also, should I hook the camera to another constant power source, but put a switch on that connection, just so I can switch on the camera and leave it on and watch it on the MFD and I can just switch it off and let it only come on when in reverse.

OR should I just have the camera constantly on and just watch it on MFD whenever I press TV button?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
×
×
  • Create New...