Jump to content
SAU Community

Funny Thing Happened Tonight

Atomnaya

By Atomnaya,
in New South Wales

 Share

Recommended Posts

Atomnaya Enthusiast

Atomnaya

Posted
Posted (edited)

I was driving home with the wife in the passenger seat, boot full of toys and stuff from shopping, minding my own business driving the 60Km speed limit. The road was slightly wet, due to the rain and there wasn't many cars on the road. by the way i drive a R34 GTT stock.

This is what happened in point form:

1. Driving on punchbowl rd just past intersection of belmore rd, a white R32 GTR with black rims with a red strip on the rims drives near me.

2. The R32 starts to be aggressive in that he's revving the engine wanting to race me.

3. We come up to the coronation pde intersection, the lights just turned yellow. I have the option to:

a - Speed up and beat the lights or

b - be a good citizen and slow down.

4. I chose B as i'm thinking the R32 would speed off but i was wrong, he decides to slow down to.

5. I'm thinking oh crap, he's his chance to show how good his car is against mine (mind you it was a nice looking GTR, but needed a wash).

6. At this time, the R32 was revving like crazy but when the lights went green his car stalled.

7. My wife and I laughed so hard i made sure the guys in the R32 heard us.

8. I drove off like a granny when the lights went. He finally caught up to me while i was turning into burwood rd.

So if you see a white R32 GTR with black rims with a red stripe and a large sticker (of some performance place), point at them and laugh!!!!

P.S if anyone who is on the forums with the above car i'm sorry i laughed so hard.

Edited by Atomnaya
Link to comment
https://www.sau.com.au/forums/topic/249983-funny-thing-happened-tonight/
Share on other sites
ChrisCross Proficient

ChrisCross

Posted
Posted
I was driving home with the wife in the passenger seat, boot full of toys and stuff from shopping, minding my own business driving the 60Km speed limit. The road was slightly wet, due to the rain and there wasn't many cars on the road. by the way i drive a R34 GTT stock.

This is what happened in point form:

1. Driving on punchbowl rd just past intersection of belmore rd, a white R32 GTR with black rims with a red strip on the rims drives near me.

2. The R32 starts to be aggressive in that he's revving the engine wanting to race me.

3. We come up to the coronation pde intersection, the lights just turned yellow. I have the option to:

...............???? and theeeeeeeenn?

DaGr81 Mentor

DaGr81

Posted
Posted (edited)

Page 4 he's got a triple plate clutch which he's getting used to cos it's new ....page 6 maybe he was like I'll stall and give em a chance page 69 maybe he was habib? And page 25 for he wanted to take your toys =)

Edited by DaGr81
GTR-32U Mentor

GTR-32U

Posted
Posted

I drive along that road most nights of the week. I do regularly see a white GTR usually parked around near the shops at croydon park, One thing I do know is that that road as it has only just been resurfaced is apparently a bit of a hot spot for late night drag racers of late.Which may explain why he wanted to run you so badly

eeiko321 Experienced

eeiko321

Posted
Posted (edited)
...............???? and theeeeeeeenn?

and then at the lights again........"OMG BRO....im from puncbowl/lakemba.......how dare you laugh at me couz *pulls out a gun*, Wulla...swear to gawd i will shoot you...!!!"

Edited by eeiko321
Vik Mentor

Vik

Posted
Posted

Lols i live on Punchbowl Road hahaha!

Ive seen that stupid GTR roaming around.. sometimes over does it, makes skylines look bad.

Sorry if your on here dude, but its the truth.. and dont come looking for my house lols!

MRXTCZ

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      After market rear camber arm adjustment

      By GTSBoy · Posted

      Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Jarsky
      R33 Fuel Pump & Brakes after alarm swap

      By Jarsky · Posted

      Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
×
×
  • Create New...