Jump to content
SAU Community

Recommended Posts

Hi Everyone

Just thought I'd let you know that we'll be running a skidpan day at Oran Park on Sunday 15th March 2009.

We'll be running a morning session from 9.00 am until 12.00pm and an afternoon session from 12.30pm until 4.30pm.

The morning session will be limited to 6 drivers, and the afternoon session will be limited to 8 drivers, so you'll get plenty of driving time.

Cost per driver is $150

This course will be conducted by well known Sydney Advanced Driving Instructor, John Boston

The format we run to is pretty simple...

Brief classroom session

The rest of the time is spent driving practising skid control skills on the skidpan, we will also be running 'motorkhana' type exercises, most of you will be familiar with John, he runs a great program for us in Sydney.

One car on the skidpan at a time.

Note that we will be using water on the skidpan to minimise tyre wear.

If you'd like to come along please shoot us an email [email protected]

or give Tessa a call during office hours on 1300 652 693

Kind regards

Kev

so its $150 for a half day? last time i was there it was only a little more for a whole days worth ??

why so expensive? how much is a full day? i dont wanna go for a few skids then go home in a couple of hours....

so its $150 for a half day? last time i was there it was only a little more for a whole days worth ??

why so expensive? how much is a full day? i dont wanna go for a few skids then go home in a couple of hours....

No one is making you go.

If you think its too much dont come, pretty simple.

$150 for a whole day with how many drivers 30 ? 40?, we have 6 drivers in one session and 8 in the other.

YOU COULDN'T EVEN PAY THE FOR VENUE HIRE WITH THESE NUMBERS !!

When it comes to value for money,no one can compete with us.

The thousands of drivers who have done days with us in the past in Melbourne and Sydney will tell you that we offer pretty good value for money.

First in best dressed ;)

This day has training guys. You would not get a full day for the same amount with this level of tuition. And the drift day would not come with tuition.

$150 bucks is dirt cheap and obviously the people that have booked thought so as well :action-smiley-069:



  • Similar Content

  • Latest Posts

    • Yeah I've had too many issues with knock off's on the BMW's. I don't want to do a job twice or more because the parts are shit.
    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
×
×
  • Create New...