Jump to content
SAU Community

Recommended Posts

I am thinking of painting my r32 but have no idea what it costs. My main reason for the paint job is because i have a small patch of rust next to the back windscreen and don't know how well the current paint can be colour matched. I know the paint will cost ~$500. What about the labour?? Thanks.

Link to comment
https://www.sau.com.au/forums/topic/25035-how-much-is-a-paint-job-worth/
Share on other sites

down to bare metal will end up costing more in product since you will have to prime the whole lot, and if going 2K then it's around $50 a litre for primer, plus $30-$50 for hardener just for that, would need about 3 litres for light coat, or to fix minor imperfections need about 3-5 litres!!! plus rubbing all that back then spray!!!

i did mine recently, did all the work myself then got it sprayed!! cost me about $1800!! took 3 months to prep but!!

details and more info here

Respray Thread

and click link in sig for results!!

could save you about $3K all up!!

Also it depends if you want to repaint it the same colour, or change colour.

For a colour change not to look dodgy, it's an engine out job.

Also, Craved's suggestions sound great - the more prep work you can do yourself, the more cash you will save BUT remember the prep work is the basis for the whole job, if the prep work is poor, the car will look like crap, it's as simple as that.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...