Jump to content
SAU Community

Recommended Posts

Yeh I know it sucks balls so im gonna apply for exemption with as many reason as possible if failed ill swap car with Parents while I save money =) or I could be a daredevil and drive it on P's but itd suck to get caught

erm insurance? not sure they would be happy to cover a driver who is not legally to drive the vehicle.

all i can say is if you ever ran into me i would sue your ass into the ground to get as much money as possible, accidents dont just happen from been stupid, it can happen to any1, maybe you are driving normally and you just arnt concerntrating enough because of been tired or what not, shit happens, and when it does it will cost you big time,

my car has cost me a shitload of money, i hate how they put on my pay slip earnings to date,

plus if you get a daily, say spend 1-2g on a daily, save while your on your p's, then by time you can drive a skyline, say you have 40g saved up, you buy the car for 12g, then insurance will be another 2g, drive the car how it is (mostly stock) and then as you drive it more you can figure out which way you want to go with modifing it, lots of people go different ways, so best to decide from driving the car not just reading stuff all day long, then when you go to work on your car you have a get around car,

JV

Lol , youve all destroyed my hopes (nah jokes) , I didnt explain the process of the car very well but I have another idea. The Non Turbo GTS is P-Plate legal and ive actually been thinking about buying one of those instead as I have heard they arnt too fast. Ide just have a Stock One, with a 5 stud conversion and a quiet exhaust and in the mean time save up for an RB25/30DET Hybrid which will be built as a seperate engine and will go in when I have my full licence. Ide drive the car through conservative power stages like havign the boost low and gradually upping it so I get used to the power. I think thats a better Idea cuz the car will be legal on P's and I will save alot more money. If you guys hadn't of flamed me I probly would lost alot of money doing it in my 'stages'. Thx to all cuz uve made me realise ill save money doing it way later down the track.

dont bother with a 5 stud conversion.... get some koya drifteks, they are drilled for 4 and 5 stud 114.3 ad when you build your 2530 you can use them as throw around rims if you decide you want to upgrade :happy:

Yeh I would have to eventually upgrade brakes and a 5stud conversion would minimise stress. I plan on Volk GT-C, Speedy Cheetahs or Starcorp Racing Fusions (19") with factory Type M bodykit and clear indicators. I dont really like ricer bodykits.

Lol , youve all destroyed my hopes (nah jokes) , I didnt explain the process of the car very well but I have another idea. The Non Turbo GTS is P-Plate legal and ive actually been thinking about buying one of those instead as I have heard they arnt too fast. Ide just have a Stock One, with a 5 stud conversion and a quiet exhaust and in the mean time save up for an RB25/30DET Hybrid which will be built as a seperate engine and will go in when I have my full licence. Ide drive the car through conservative power stages like havign the boost low and gradually upping it so I get used to the power. I think thats a better Idea cuz the car will be legal on P's and I will save alot more money. If you guys hadn't of flamed me I probly would lost alot of money doing it in my 'stages'. Thx to all cuz uve made me realise ill save money doing it way later down the track.

good choice! , now you can start with suspension/lsd/brakes/strip stuff outta the car to make it lighter :blink:

driver training will fix it

do it!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

+1 :happy:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...