Jump to content
SAU Community

Help Help Help 48kw

shotter

By shotter,
in Engines & Forced Induction

 Share

Recommended Posts

  • Replies 124
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Posted Images

blind_elk Grand Master

blind_elk

Posted
Posted
So if the cam marks are where they should be, The belt hasn't jumped a tooth and if the timing light is showing the right angle then this would rule out the cam? Or would i still need to replace the cam for one with a key and the CAS for one with a key?
I suggested that the timing light was showing the WRONG angle. Check it - it should be 15BTDC at idle.

Forget about the cam / CAS - just get the ignition timing right. (you don't need to replace the cam or the CAS)

shotter Rising Star

shotter

Posted
  • Author
Posted

Well they have done a compression test and said that the compression was pretty low on each cylinder. But they were all the same. They told me that they have been busy the past few days and that tomorrow they will be able to put in a propper look.

BeEnAr Experienced

BeEnAr

Posted
Posted

Maybe you've done a head gasket or got a split in the plenum? seems odd that it was fine 1st thing then not a bit later. I can't wait to hear what the problem was, no doubt it will be nothing we have suggested here lol

shotter Rising Star

shotter

Posted
  • Author
Posted

Well friday morning the solinoid that adjust's the valve timing was working fine. Then later in the day it stoped working. The ECU was not sending the turn on command. Then this morning 1st thing it was working fine again. It was even sending the command this morning when it wasn't connected to the solinoid. Which rules out the solinoid as being faulty. The few things we noticed was there was a colent temp sensor error. and the O2 signal was at 0Volts. So were changing the O2 sensor and the colent sensor. Then were going to throw it back on the dyno and see if it's happy or not.

Travis Trayhern Proficient

Travis Trayhern

Posted
Posted

dude i have told you its the CAS it will cut in and out random thats why i said give it a tap on the dyno thats why it was fine for ya drive then went back to shit, also o2 sensors dont do anything except economy when ya tune a car you disable the o2 sensors so dont bother changing them and your tuning shop should know this are you sure thy know what they are doing?

blind_elk Grand Master

blind_elk

Posted
Posted
Well friday morning the solinoid that adjust's the valve timing was working fine. Then later in the day it stoped working. The ECU was not sending the turn on command. Then this morning 1st thing it was working fine again. It was even sending the command this morning when it wasn't connected to the solinoid. Which rules out the solinoid as being faulty. The few things we noticed was there was a colent temp sensor error. and the O2 signal was at 0Volts. So were changing the O2 sensor and the colent sensor. Then were going to throw it back on the dyno and see if it's happy or not.
I would suggest you have a broken wire somewhere in the loom to the solenoid. It is intermittently losing connection because of vibrations, then making the connection again.

Try permanently powering the solenoid - see how the car goes. Try a new connection between the ECU and the solenoid.

TTT Grand Master

TTT

Posted
Posted

there was a thread on here where a guy had a misfire on his GTR.

he changed every single thing that everyone suggested.

then later, he found that the LOOM, where it goes through the panel work, had rubbed against the metal.. eventually, one wire got scratched open and would keep thouching the bodywork, causing a short out each time, which was like a missfire for the owner.

I'm sure it was near the wheel well...

might be something else you can add to your list to check.

I think he has a missfire thread here..

I know your's isn't a missfire and neither was his really...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Duncan
      What brakes on R34 GTT(Europe)

      By Duncan · Posted

      Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • 04-LOOX
      R34 GTR Vspec Garage Sale - All must go!

      By 04-LOOX · Posted

      Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...