Nismo, Exedy, Bride, Hks, Gtr, Rx7, Ae86, S13, Type X

[toy86]

Clearing some good quality items that i dont have the space for, I am fairly negotiable on price but i am not in a rush to sell these so please be reasonable

Items located in Melbourne

Contact Info: PM or Mobz Adam 0401 494 339

::: AE86 Rolling Shell :::

- 1983 aus model

- chassis seam welded (cost $1500)

- CAMS Approved six point weld in roll cage (Cost $2000)

- Cage has harness bar

- Shell is relatively rust free, (2 small 10 cent peicies in the rear gaurds which have been grinded out.

- Most of the sound deadening has bee removed

- all glass except front windscreen still in tact

- all doors, boot and bonnet completely rust free

- can supply with TRD rear ducktail, T-series diff & Cressida front struts to suit rx7 from brake conversion (all at extra cost)

- most of the body in bare metal

Car is rolling and comes with complete interior and a standard diff and brakes

Will need to be blasted and painted (can have this organised PM for more details)

Asking $5k or nearest offer

::: Nismo GMAX Pull Type Twin Plate :::

bought about 1 and half years ago but never bothered to fit to my car as its still not drivable

- Made by Exedy

- Pull Type

- Came off a R33 GTR

- Checked by clutch place prior to purchase 60 - 70% left

- Roughly about 20 - 30,000 kms if driven properly

- cost around $1000 from Jim Berry (Quoted by RE Customs in Melbourne) to rebuild

Asking $550 or nearest offer

::: Carbon GT Wing :::

bought a while ago but have no use for it

- very light weight

- carbon fibre

- carbon fibre ends

- steel/aluminium brakets

- similar to cwest and V8 supercar style

- can measure and weigh if necessary

asking $250 or nearest offer

::: Mazda RX-7 Savannah GT Limited 12A 65,000 km's :::

- 1979

- Alpine/Bone White

- Limited edition cloth interior

- Electric front fenders mirrors from factory

- 12A 3speed AT

- old school JDM (genuine JDMness

- privately imported into australia in early 80's

- registered till 94, stored till now

- 65,000 kms interior condition supports km's

- all original down to the tyres (still have 60% tread on them)

- Mazda Speed Factory Fitted Rear Spoiler

- Mazda Factory Floor Mats (Red and black)

- Interior in excellent condition

- have started the car (needs carbie tuned as its running rich as on the front bank)

- can start for anyone who wants to check it out

- prefer buyer to have a good look at the car before purchase as there is alot of work to get it back to prestine condition

- rust on some parts of body

- suited to someone who knows what this would be worth in good condition

- Comes with spare door, gaurd and if sold for the price i am after will come with an exhaust to replace the current rusted out zorst

Asking $2500 or nearest offer

::: Nismo Strut Brace :::

- suit s13

- Silver in color

- Nismo sticker still in tact

asking $120

::: Bride Zeta II :::

- Black

- Fixed back

- Some rips in trim

- Replacement trim is $150

- Needs 1 cushion

- Actual Seat in excellent condition

asking $250

::: R32 Drivers side Bride Rail :::

- side mount to suit fixed back seat

- bought a while back but dont need any more

asking $150

::: FTO drivers side Bride Rail :::

- came with the seat

- could be customised to suit another car with similar holes

- suits fixed back bucket

asking $100

::: Brand New s13 Passenger side Chassis rail :::

- bought 5 years ago

- still in as new condition

- suit someone who has bent their rail

- goes the full length of the left side of the car

::: 180sx Type X Front Bumper Extensions :::

- Genuine Nissan

- Plastic not FibreGlass

- Clip onto front Guard

- Excellent Condition

Asking $150

::: Nismo Boost & EGT Gauge :::

- bought a while ago but never used

- 80mm Gauge

- Boost is analogue

- EGT is digital

- Comes with all wiring and sensors

- Very Hard to find in OZ

Asking $250

::: Defi Water Temp Gauge:::

- 60mm

- Black Back ground

- No Sensor or unit

- Small Dint in the facia

Asking $50

::: HKS 52mm Gauge steering column holder :::

- rubber

- mounts on the steering column

- one of the best i have used on my car

Asking $80

Items located in Melbourne

Contact Info: PM or Mobz Adam 0401 494 339

Edited January 8, 2009 by toy86

[RBLUV]

pics of bride seat please

[toy86]

will try and pics up by the weekend

[eXquiSit]

pics of nismo gauge n the sensors please!

also i'll take the wing waiting on pics and dimensions please

thanks

[NothingSuss]

hey mate im interested in the clutch, i sent you a pm and a sms but no reply? get back to me when you can cheers...

[toy86]

Hi All,

have been away for a few days,

will reply to PM's and SMS's later today.

Pics will be up tonight hopefully

cheers

[toy86]

Pics of NISMO GMAX Twin Plate

Pics of Carbon GT Wing

[toy86]

more pics to come

[Roy]

Very interested in carbon wng. Can you post up the length and weigth. Also pictures of the steel/alloy mounts and the distance they are apart from one another. Cheers

[toy86]

roy its adam,

i bought the bride r32 rail off you a while back,

come round and take a look at the wing,

i'm sure your 32 would be due for a drive instead of collecting dust

[toy86]

::: Nismo GMAX Pull Type Twin Plate :::

bought about 1 and half years ago but never bothered to fit to my car as its still not drivable

- Made by Exedy

- Pull Type

- Came off a R33 GTR

- Checked by clutch place prior to purchase 60 - 70% left

- Roughly about 20 - 30,000 kms if driven properly

- cost around $1000 from Jim Berry (Quoted by RE Customs in Melbourne) to rebuild

Asking $550 or nearest offer

::: SOLD :::

[RBLUV]

pics of the bride seat?

[toy86]

Hi All,

sorry for the late replies been far too hot for me to do anything the last few nights other than go beach.

anyways i have taklen photos of most of the items and will endeavor to get the stuff sold and sent in the next two weeks as i am overseas for a while

cheers

Adam

[toy86]

eXquiSit & Roy

The GT wing measures

1448mm wing span (end to end)

275mm width in the centre of the wing (this is the widest part of the wing)

240mm width at each end (this is the least widest part of the wing)

the mounting holes are 340mm and 440mm from the ends

I cannot check the weight as i dont have scales but my guess is no heavier than 1.5 kg (dont know how good my estimation skills are)

also the mounts are in my car which is at the mechanics so i could not get photos of them or measurements

any other info dont hesitate to ask.

Edited January 20, 2009 by toy86

[eXquiSit]

yea pics of nismo gauge n sensor

and also pics of wing base

n dimensions n also weight if you could mate!

=)

[toy86]

Hi eXquiSit,

will get pics and weight as soon as i can (prob no earlier than next week on the base)

pics of the nismo gauge are below,

i forgot to meantion that the guage also has a peak/hold function for the boost gauge which can be set using the control unit.

I dont think you will need any more pics but if you do let me know

[toy86]

HI2U

pics of the bride seat

[toy86]

ovaxitd pics of the defi gauge

mind riot pics of the HKS gauge holder

[toy86]

hi all,

pics are up.

let me know what your after

cheers

[dazedg]

nismo strut brace the type to clear ca18det without washers?