Jump to content
SAU Community

Recommended Posts

i have a rb30/25det engine for sale which has just been removed from my car due to a different direction in project engine consists of:

RB30 block balanced and blueprinted

shot peened and nitrited standard conrods

wiseco forged pistons and o-ringed with copper headgasket

drilled and tapped tensioner to suit rb25det head

done approx. 15000km since block was rebuilt

head has done 2000km since reconditioned with new valves and seals,

Tomei camshafts 256 degree angle and 8.5mm lift

stiffer valve springs to suit

welded, machined and drilled and tapped to allow vct to still works

exhaust manifold is custom steampipe high mount hpc coated in black with t3 flange and to suit external wastegate

intake manifold is a polished plazmaman plenum on standard runners with standard throttle body

custom alumnium fuel rail and 6x 660cc rochestor injectors

ford xr6 idle control valve (as standard one kept failing)

polished rocker covers

gates timing belt

engine comes with oil, water and power steering pumps and belts also alternator

Asking price is $5700 neg will seperate if not sold

not sure how to put pictures up but can be seen on ebay over weekend or can email pics to anyone interested any questions call Ben on 0423-496-210 leave a message if not answered or send text thanks

Link to comment
https://www.sau.com.au/forums/topic/251847-rb3025det-engine/
Share on other sites

Go to Imageshack or Tinypic and upload the file onto your computer , then click insert image. Go to imageshack/tinypic page and copy the web address that the upload gives u and paste into the insert image box. insert the it twice incase the 1st one comes up with a white box with red cross. If it does in the second image insert you should have or sum shit like that twice at each end delete one of em and it should work. Thats what I do and it works for me ><

hey man

interested in plazmaman intake plenum, let me know if u will separate

thanks

slav

would like to sell head complete $3000 but if no takers i will break it up

thanks

any power figures?

with this setup and a garrett to4z ball bearing, cdi ignition, ems 8860 and a stengthened auto power was 346.8rwkw at 18psi and 303.4rwkw at 16psi.

individual prices are now:

plazmaman plenum and standard intake runners+throttle body, xr6 turbo idle control motor $1000

custom steampipe exhaust manifold hpc coated black t3 flange and suit external wastgate $800

complete head minus manifolds $2000

block minus alternator $1000

aluminium fuel rail and 6x 660cc rochestor injectors to suit $550

Apexi avcr electronic boost controller complete $450

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...