Jump to content
SAU Community

Recommended Posts

so last night went for a drive ,

driving along , gave it a squirt and then it started rattling , so i pulled over to inspect and there is a clunking noise in the engine bay ,

i assumed it was the clutch fan but wasnt , discovered it was coming from the back of the intake plenum ,

checked the oil and it was incredibly low , limped into a servo and got 2L of oil for it ,

put it all in , let it run through , turned it off , let it sit for 5 mins , started it up again for 5 mins and still made the clunking noise .

took it for a drive and it had no low end power and sounded like a WRX , soon as it came on boost it seemed fine :S

returned to the petrol station and got my mate who was cruising in his skyline with me ,

took him up the road and we both decided best to go home and park it .

limped down the freeway on the shoulder to home , got home and it cut out as i was going in the driveway , let it sit for a good 90mins and then came back to it ,

cold started it , didnt make the noise as loud , opened up the radiator cap and let the car warm up to see if it blew bubbles , nothing.

only thing we could see was some particles of gunk in the top of the radiator .

went and looked at the exhaust and there was bubbled up carbon and it was all over the ground .

this leads me to beleive i could of possibley done a head gasket ?

ask me any questions as i have no clue what it could possibley be and have no way of getting the car anywhere for a few days

cheers.

Link to comment
https://www.sau.com.au/forums/topic/252038-rb26dett-is-bonkered/
Share on other sites

Hmmm try n drain the oil from the sump or remove the sump and look for something floating around cos it reminds me of the time i blew a rocker arm in my s15, it rattled for a while and then went away cos the broken rocker and shims had fallen down into the sump.

The engine was crappy to drive but when it hit boost, it felt better but the power was lacking.

Good luck with everything mate, i hope its a small fix, please keep us updated!

Hmmm try n drain the oil from the sump or remove the sump and look for something floating around cos it reminds me of the time i blew a rocker arm in my s15, it rattled for a while and then went away cos the broken rocker and shims had fallen down into the sump.

The engine was crappy to drive but when it hit boost, it felt better but the power was lacking.

Good luck with everything mate, i hope its a small fix, please keep us updated!

cheers for the advice mate !

will drain the sump a bit later today when the sun goes down a bit .

as for removing the sump i dont really trust my self with doing that as i only have a shitty jack and 2 jack stands :s

Spun bearing would sound like putting marbles in a can and rattling them... or even running a stick along a corrugated fence... and you'll hear it when you first turn on the car and then it might go away (depends on how bad it is) but when you rev it over 3k you'll hear the sound again.

If it's the head, check the oil filler cap for chocolate-milk looking stuff. If you find that, the heads blown.

When's the last time you changed/filled up the oil? Sounds like it'd be using quite a bit of oil...

But it sounds like a spun bearing. Low oil = massive bearing issues.

How's oil pressure?

But it sounds like you'll be needed a rebuild... which will be between 5k and 10k but can go up and up... depends on how well you want it rebuilt, and what the quality of the engine is (block is okay? etc).

engine seems to idle fine but when you accelerate a bit it sounds like something has come lose up front of the engine ,

still has carbon water in the muffler and on the ground around the back of the car

hopefully taking it back to where it got dyno'd , tomorrow but they will no doubt try and stiff me

sigh :cheers:

Yea, my 26 went the way of the grim reaper. It ended up chewing a piston ring and having a blown head gasket. If you drain the coolant and its a milky brown, head gasket time. But that knocking is cause for concern indeed

Fingers crossed... but then again, nothing these days comes free :P

yeah :P

only time will tell , when i went there earlier they werent stuck up about it at all , they understood and didnt try to deny stuff

so that has reassured me a bit :happy:

*waits for phone to ring*

  • 5 months later...

probably should post an update in here ,

almost 7 months on and it ended up being spun bearings on cylinder 5 & 6 and the pistons had mashed the valves on both cylinders.

i was going to rebuild but i gave up and bought a 25det

me and a couple of mates pulled the 26 out and i stripped it over a week or so and started parting it out.

right now the car is still off the road as im still tracking down parts for a 25det i bought ,

all im in need of is some oil piping, vacuum lines and a couple of coolant lines.

if anyone's the slightest bit interested ill dig up the pics of everything.

cheers for all your help in trying to work out what was wrong with my engine via a keyboard

shows that SAU is a good community and people aren't afraid to help out !

cheers guys

Put up pics, it cant hurt :rofl:

Just to clarify, you're now putting an RB25DET into a GTR?

haha nah mate , its a r33 gts25t that had a 26dett in it , thats the ONLY reason im putting a 25 into it :D

ill post up some pics later today :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I also used Knox driveshafts when I the slip yoke T56 to the 3bolted TR6060 type. I believe I was one of his first jobs as it literally changed hands when I was there, started by the old owner and finished by the new. Everyone seemed pretty great about it. So wasn't shy/seemed pretty knowledgeable when dealing with weird custom people like me.
    • Just a reminder orange park was cool back in the day   and drifting the main circuit was even cooler   f**k I miss that car  
    • We used Knox Drive shafts years ago when we were doing gravel rally, good guy but I heard it had changed hands? He's got a lot of stuff and is miles cheaper than GJ and so on. He used to have a lathe setup with a MIG torch on the tool holder so he could get the uni welds just right, quite a clever guy. I just got a driveshaft done for my sequential installation and that was through Balancing Services Australia in Preston, they did the Gibson cars in the old days. New genuine CV's, billet yoke, new centre bearing and chome moly shaft was $2k.
    • Thanks for sharing that mate, I've got a couple of spares on the shelf but all the unis are tight....will give old mate a shout. BTW are you sure it wasn't just a $400 paint job? Any detail of what they replaced (cut/reweld?)
    • Yeah I saw that about the US Q50 recently, apparently it was shown to Inifiniti dealers (probably to help with their depression about the cars they can sell). Seemed like a really obvious step to me, the platforms are very similar in many ways. Even if there aren't many people who actually put the money up it should really help with image/reputation. What hasn't been clear anywhere if that is a V38 model of if they are just going to add the trans as an option in a new model year. What they did with the Z from 370z to "Z" is just weird so I'd be surprised if they released this as a V38. Great news for me to have an option; it is far from confirmed that I can get any decent track sessions through the auto so having a manual I can swap to is great.
×
×
  • Create New...