Jump to content
SAU Community

Recommended Posts

Hey all,

Well last night i got my video camera back from a mate so me and my best friend george decided to go to some private roads (those ones i showed u slip). And get a bit of footage. We tryed a few different places and gained some great footage. Final drift of the night and im about to pull over, but decided to try this one corner in revers thinkin it would be the same. Well to cut a long story short it was OVERSTEER, DRIFT, OVERCORRECT, GUTTER, FRAGMENTS OF MY FRONT LEFT MAG IN MY FACE. I hopped out of the car histerical! Kicking it screaming yelling and what not then calmed down and tryed to think of story to tell dad. Then i thought **** it ill just leave it at home and go to a mates house so i did. I didnt get a chance to check the car out as i have school today and lighting was poor.

My question is: Is the front suspension setup similar to that of the S13? I ordered a new lower control arm and radius rod which should be waiting for me this afternoon, and ill try know it over tonight providing nothing else is broken. I only ordered these parts as i could see the control arm was bent and my mate did the same thing a month ago in his S13, is there a possibilty there are more suspension components that i am yet to see? And if neone has done a similar thing, are there any other things i should check or pay particular attention too??

Cheers

John

its not the same man, let me get this right u crashed in reverse ? damn dude, u should never do silly things in reverse, specially in the dark, thats like when a car is the most uncontrollable! tough luck man hope u find the parts. check everything man!

He went round the corner in the opposite direction to what he was originally doing it in.

Good one John.

I would replace all the suspension arms, personally, if it smashed a wheel. 1-2mm out = stuffed alignment.

Get it fixed for the 5th!

hahahaha cheers for the replys guys, not in reverse slip got it right. Yeah the suspension is similar to the silvia but the skylines look much better built and stronger (haha to a point!) cars back on the road it was a 2 hour job, only had the replace the control arm and the car drives exactly the same as it used too, its booked in for a wheel this morning alignment but i dont really think it needs it.

PVA_GLUE: Drift a WHALE!!!!??? NOT EVEN, we have some awesome footage!!!!

boostimports: I go to brisbane grammar

cheers for the replys, there's still the one months wait for a new mag, and i need a new side skirt, but i spose u get that.

I dont actually have the hardware, or software for that matter to put it on the computer yet, i was gonna buy it but then i had to fix the car, haha, ill do my best to get it asap.

boostimports: stereo type me! but seriously, i worked damn hard for my car, and im not ashamed to say my parents helped me out but i still worked damn hard for it, and so did most of my friends, but yes there are those few that are lucky and did nothing for there cars, A good mate of mine has a brand new M3, but no one gives him shit for it, he's just lucky to ahve parents that are prepared to provide him with shit like that.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit difficult to follow. Have a look below and see what the standard R32 layout was like. Note there was a restrictor in place immediately before "turbocharged pressure control solenoid" that, if removed, magically got you 1 bar boost.
    • I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
×
×
  • Create New...