Jump to content
SAU Community

Nepean Hwy Caution

joeyjoejoejuniorshabadoo

By joeyjoejoejuniorshabadoo,
in Victoria

 Share

Recommended Posts

joeyjoejoejuniorshabadoo Grand Master

joeyjoejoejuniorshabadoo

Posted
Posted

just a freindly word of advice to watch out on the nepean hwy today...

i came out of the BP at the north rd intersection heading south and there was a HWP ar sitting on the side of the road facing north

as i drove past (well under the limit) i noticed him putting on his seatbelt and looking at me. he then pulled a quick u turn so i took the next turnoff and hid... as you do... :)

i sat in backstreets for 5 mins or so and eventually came back on to the hwy a few k's down the road expecting him to be gone...

as i'm sitting in the left turning lane (2nd in line with my rego totally covered by the car in front) i notice him crawling down the road (say 50 in an 80 zone looking around the side streets... he passes me and pulls over a couple of hundered meters away, where i would have driven past him...

i turned right and GTFO'd

all good, never saw him again.... but he was out for import blood! so be careful!

Link to comment
https://www.sau.com.au/forums/topic/252399-nepean-hwy-caution/
Share on other sites
Mohsen Grand Master

Mohsen

Posted
Posted
Haha nice work man! :)

ToF is ur chaser the one with the plates, CH4SER?

grey one, always goping thru chaffey street in thomo

oh and

godd its like teh police are hungry.. hungry for teh imports....

they really should start selling car bras that make ur car look like a camry LOL

_Ryan_ Grand Master

_Ryan_

Posted
Posted
ToF is ur chaser the one with the plates, CH4SER?

grey one, always goping thru chaffey street in thomo

oh and

godd its like teh police are hungry.. hungry for teh imports....

they really should start selling car bras that make ur car look like a camry LOL

if its his saw ya near acland st, sounds nice.

ToF Experienced

ToF

Posted
Posted
ToF is ur chaser the one with the plates, CH4SER?

grey one, always goping thru chaffey street in thomo

oh and

godd its like teh police are hungry.. hungry for teh imports....

they really should start selling car bras that make ur car look like a camry LOL

Nah not me mate.

Also I tried the whole look like a Camry thing, didn't work for me lol.

tets Proficient

tets

Posted
Posted

they are always on the hunt now days. past 2 nights same thing has happen to me aswell.

i drive normal, see a cop car infront of me. so i slow down and go behind a few cars.

cop car turns right @ intersection and does uturn.

and u GTFO as fast as u can, obeying the speed limit of course.

Jay_R33 Community Regular

Jay_R33

Posted
Posted
they are always on the hunt now days. past 2 nights same thing has happen to me aswell.

i drive normal, see a cop car infront of me. so i slow down and go behind a few cars.

cop car turns right @ intersection and does uturn.

and u GTFO as fast as u can, obeying the speed limit of course.

haha i did the exact same thing...saw him a few cars ahead and i judged it that if i stayed in the right lane and the lights turned red i would be exactly next to him so i said f*k that jumped behind a granny and hoped...then he turned off at the lights so all good

HWP scare the living crap outta me i hate driving a car when u have to be careful even if u drive the limit...its like being around ppl who friken snap easily even if ur mates with em feels like your walking on egg shells

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Kinkstaah
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By Kinkstaah · Posted

      Hey, it's me! Though honestly, if I had 20M in my bank account tomorrow, I would not want to be rid of my car all of the sudden - Which makes me think this is money stuff, not "I actually hate car" stuff. I'd probably double down and buy even more trinkets and fun things for it. If this is not you, then sell it cheaper. It will sell at a certain price after all.
    • Kinkstaah
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By Kinkstaah · Posted

      Of course it would be - But you shouldn't be here.
    • GTSBoy
      Hiya!

      By GTSBoy · Posted

      This is the LCA mount reloctaion kit. Self explanatory in its description. https://au.gktech.com/products/s13-180sx-r32-subframe-anti-squat-reduction-weld-in-kit?_pos=62&_fid=1e812d392&_ss=c These are the alloy subframe bush inserts that I am using. I like them. https://au.gktech.com/products/rear-subframe-slip-in-collars?_pos=29&_fid=1e812d392&_ss=c Alternatively, if you have original and shitty bushes, you might consider outright replacement with poly. https://au.gktech.com/products/polyurethane-rear-subframe-bushes?_pos=28&_fid=1e812d392&_ss=c I would also higly recommend that you look into adjustable RUCAs and tension rods, so you can sort out the camber and bump steer behaviour, especially if the car will be any more than ~15mm lower than stock. I would also highly recommend the GKTech FUCAs, although you really should do some research and learning on the subjetc of R32 FUCAs before making any decisions. All of this will be criticaly difficult to get through a TÜV inspection too, if that happens to be relevant to you. Note that if you do install the relocation kit, you will absolutely have to replace the associated bushes with spherical joints (you can read all about that on the product page) or upgrade the LCAs also.
    • Milkmun
      Does the r33 have a cabin filter?

      By Milkmun · Posted

      None on 33s.
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      I picked up my block and head last week and have been slowly assembling it since then. Pictures I took earlier this week. The rest of the auxiliaries are on now. I just have my intake manifold runners to tap for my WMI direct port setup before putting it back on. I should hopefully have the motor back in by this weekend.   
×
×
  • Create New...