Jump to content
SAU Community

Recommended Posts

hey pple i have searched and i could not find what i was looking for :P

at moment im running (splitfire coils )0.8mm gap in my r33 heat range 7 and i was thinking of going to 1.1 mm gap....

would these improve my millage and make the car run better ?

or should i stick to what i have now?

i have read of some people running 1.1 gap successfully with upgraded coil packs?

mods are basic filter,zorst,10psi,coller,splitfires

Link to comment
https://www.sau.com.au/forums/topic/252709-splitfires-and-11mm-gap/
Share on other sites

i know lines drink a lot but if it was able to run on 1.1 plug i tough would make the car run better and in gain receive extra mileage and power .

just reading thru some spark plug threads people seemed to run a 1.1 gap and got a much better burn of fuel making the car run better.

that's why i asked about the bigger gap

You can run a 1.1mm gap, quite easily.

Even on 10PSi...

I run a 1.1mm gap, and was at one point pushing 18PSi off a big huffer turbo, into a 3.0L block, without an issue of misfire.

I was also running 12PSi on the RB25 setup with a 1.1mm gap, without an issue in the world.

The stock plug gap is set at 1.1mm, and the FRESH coils from the factory, will run this, even with a few PSi more being thrown at it, so why wouldn't a set of coils that generate from memory a 50% stronger spark?

You can run a 1.1mm gap, quite easily.

Even on 10PSi...

I run a 1.1mm gap, and was at one point pushing 18PSi off a big huffer turbo, into a 3.0L block, without an issue of misfire.

I was also running 12PSi on the RB25 setup with a 1.1mm gap, without an issue in the world.

The stock plug gap is set at 1.1mm, and the FRESH coils from the factory, will run this, even with a few PSi more being thrown at it, so why wouldn't a set of coils that generate from memory a 50% stronger spark?

thanx for that , i was researching if it would be ok to run a 1.1 plug as per specs as i have new coils and only minor bolt on bits.

the reason for post was to see if anyone else has done it, i did not say i will do it,or will not but, why not ask and save on time and changing sparkies over when you can get a answer from pepole that actually have this setup and running it like MBS206

I agree. Iridiums are a waste of money. What gap you will be able to run with out the car missfiring will depend mainly on the condition of the coilpacks. If they are old and overheated and cracked then the car will missfire. If they are in good condition then it show easily be able to run 1.1 gap.

And i thought splitfires werent any stronger than new stock coilpacks... has this 50% stronger spark been proven?

And i thought splitfires werent any stronger than new stock coilpacks... has this 50% stronger spark been proven?

they must be stronger. i havent heard of anyone running new nissan coilpacks in heavily modified cars. splitfires are a common choice for racing applications.

on my splitfire box it has a graph showing a dyno comparison, an RB making 323ps with regular coilpacks, and 330 with splitfires. theres also another graph which i assume is something to do with spark or volts or something (its in japanese) but the splitfires easily outperform the comparative product.

Ah k just because lots of people say that they arent actually any better. They are just more popular because the are less than half the price of new nissan coilpacks from the dealers. Although i know there are many 400kw gtr's running stock coilpacks without any problems.

With the graph, were the nissan coilpacks old or new. Cos obviously new splitfires are going to outperform 20year old nissan ones..

Ah k just because lots of people say that they arent actually any better. They are just more popular because the are less than half the price of new nissan coilpacks from the dealers. Although i know there are many 400kw gtr's running stock coilpacks without any problems.

With the graph, were the nissan coilpacks old or new. Cos obviously new splitfires are going to outperform 20year old nissan ones..

well thats a very good point. everyone rubbished kkr turbos a while back, many people still do, but they seem to go alright for people who actually tried them, inc. myself.

the graph says splitfire vs "normal", engine is an rb26dett. so if theyre new factory coilpacks, 7ps is a pretty big gain.

i didnt even consider the cost, i though splitfires were fkn expensive. but then again, genuine nissan is a total rip off for just about everything.

LOL yeah apparently genuine new nissan ones cost near $1000 so splitfires are half that price which is why they are a good choice even if they arent any better.

But i guess if they are better than new stock ones thats an added bonus

hey must be stronger. i havent heard of anyone running new nissan coilpacks in heavily modified cars. splitfires are a common choice for racing applications.

on my splitfire box it has a graph showing a dyno comparison, an RB making 323ps with regular coilpacks, and 330 with splitfires. theres also another graph which i assume is something to do with spark or volts or something (its in japanese) but the splitfires easily outperform the comparative product.

the hks drag gtr runs stock coil packs, the only reason ppl go spitfires is cause nissan

want something like $1000 for them brand new

they must be stronger. i havent heard of anyone running new nissan coilpacks in heavily modified cars. splitfires are a common choice for racing applications.

on my splitfire box it has a graph showing a dyno comparison, an RB making 323ps with regular coilpacks, and 330 with splitfires. theres also another graph which i assume is something to do with spark or volts or something (its in japanese) but the splitfires easily outperform the comparative product.

Stronger based on what?

They are not stronger at all.

You are comparing 10-15yr old worn Nissan coils, vs a new coil out of the box, which is wrong. Unless you had brand new coils in your car, your results/testing is incorrect.

If you purchased a NEW set of Nissan coils, put them against Splitfires - you wouldnt know the difference other than one lightens your wallet substancially more than the other.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...