Jump to content
SAU Community

Recommended Posts

My mate has asked me this question a fair few times and i really don't know the answer,

He wants to know if he buys a turboed R33 can he de-turbo it without having any problems,and if so what would he need in part wise, i know this is a very weird question as most people want to turbo there car, but with these new p plate rules i'm sure this question will get asked more and more...

Link to comment
https://www.sau.com.au/forums/topic/252729-removing-a-turbo/
Share on other sites

The amount of times this question is asked makes me wanna shoot the person who posts it every time.

The VIN number of the car states that it IS a turbo.

If you remove the turbo the VIN will still say its a turbo.

You are still driving an illegal car even though it has the turbo rmoved.

Simple as that.

The amount of times this question is asked makes me wanna shoot the person who posts it every time.

The VIN number of the car states that it IS a turbo.

If you remove the turbo the VIN will still say its a turbo.

You are still driving an illegal car even though it has the turbo rmoved.

Simple as that.

Thanks mate thats all i needed to know!!

If he can handle driving a low compression N/A for so long... it will be like turbo lag without the boost and quite humiliating when your car struggles to get of the line ;)

As been mentioned before, depends how they classify the car even without a turbo, and also most State's rules are something along the lines of "a vehicle that has had its performance modified" which could really mean having a turbo removed technically...

For the cost of de-turboing a car now, and then reverting it back later (lets not forget about the way the ECU is probably going to see the car without a turbo...) he'd be better off buying a N/A now and doing the bolt-on turbo conversion later, or engine swap later, or change the car later.

If he wants to drive an even slower skyline around, he might as well by an econobox till he's on his open licence unless he absolutely must have a Skyline purely for the looks and status.

On another note though, if one was to do the turbo removal...how much of a difference would it make if the car was run with a more restrictive exhaust?

My reasoning behind this question is that if too large an exhaust on an N/A Skyline results in less power down low, but more top end power due to decreased volumetric efficiency...would there be any "significant" difference running a smaller restrictive diameter exhaust on a low compression N/A Skyline? At least to the point where it became bearable to drive? What difference would this make on wear n tear on the engine and fuel economy? Will the ECU be able to self learn the new set up?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nah its a server spammer thing  Although, now that I manually approve all the accounts I can probably loosen up some of the restrictions.  
    • Thread bump, again! Although, no bad news this time. Posting for the sake of possible root cause. Basically, I rebuilt it (mostly stock), installed Haltech + sensors, had it running fine on new ECU.  Still not really understanding why it cracked pistons last time. Got to tuners, and while checking timing, noticed +-10deg of timing scatter while revving. Changed CAS, and it was rock solid. While not definitive, can't imagine seeing 20+ psi with that amount of scatter would be a good thing. Also glad I found something.   Bit more of a run down; Carried out a stock rebuild, a set of stock pistons, out of a spare bottom end. Everything stock apart from head studs and oil restrictors. (so I can pretend I didn't let the Nissan out, ha.) Armed with the measuring gear and FSM, set about doing overhaul. Oil restrictors as per oil control thread for a RB25, stock oil pump, drifting. Head drain/vent from rear of head, to passenger side of sump above oil level. Two dash 10 vent lines from drivers side of sump (unused atm) Hi octane style cam cover breather kit Splash covers over last 2 cam caps. Both breather lines from cam covers to vented to atmosphere catch can, not plumbed back into sump (wanted to see what it was actually breathing). Got it run in (did about a 1000km) no to low boost scenario, As I had questions over old ECU setup. Installed haltech +sensors for flex Retune on E85 (finding CAS Issue along the way), made 300rwkw at 20psi, out of wastegate. Did a drift day the next day (yes, it was a big weekend!) and was checking catch can throughout the day, ZERO blowby. I mean nothing. Lines from cam covers are not even wet. Done a bunch of street driving, spirited and catch can is still dry. Early days I guess, but pretty happy so far. Also now run 10w60, up from the 10w40 that I used to run. Oil pressure is significantly better, especially when hot (as you would expect)      
    • Thanks buddy. I thought it was a server storage thing. 🤣
    • Perfect! Thanks for this, both look like great options!
×
×
  • Create New...