Jump to content
SAU Community

Recommended Posts

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

well you won't be maximising the efficiency of your mods.

as RedlineGTR said, standard ECU isn't exactly suited to run anything out of it's stock specifications by too much...especially if you're running aftermarket turbos...

SAFC2 is sorta like the entry level fuel adjustment computer...but something like the PowerFC would be much more versatile

rob, i've got 250rwhp and my injectors (stock) are at 70% (according to powerfc) duty from memory. Is there a ratio/relationship between power and injector duty?

When I end up putting the Z32AFM on I want to up the boost to 1.1bar or so in an attempt to reach 280rwhp without having to get injectors (I have a adj. fuel reg and 600hp fuel pump).

Mark

If you have a small budget, you could stick to the stock injectors, get a bigger fuel pump like a bosch 910 (both gtst-vspec and I run one of these) and use a safc2. Granted you wont be able to play with your ignition maps, you will be able to adjust fuel in and out. The car would still be quick on the road, but if you've gone to the trouble and expense of a bigger turbo you really should put in the full ecu to compliment it.

thanks for the info rob77 & GTS-t VSPEC !

yeah i'm kinda on a budget right now because i dont want to spent too much on the car. I would still need something to control my fueling, so definately an SAFC2 is good enough for that.

I have a turbo & intercooler at the moment in my room.

The things i have to get are,

- fuel pump

- safc2

- intercooler piping

Does the adjustable fuel regulator do much difference ?

Do you think I should put in an adjustable cam gear on the exhaust side and retard it by 4 degrees ?

Thanks again all of you for your contribution ! :P

I did the cam gear, and in mine it made phuck-all difference, but others have reported gains.

Depends what power you plan on gettig, anything more than 340rwhp on stock injectors will require an increase in fuel pressure.

Rob and I both use the bosch 910 fuel pump, his is in-tank, mine is external.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You know how your car rolled through a fence in your last jacking escapade? Scissor jacks increase the likely hood of that sort of thing happening immensely!
    • http://calfinn.com.au/product/1500kg-standard-trolley-jack-cj-2t-c/1500kg-standard-trolley-jack-cj-2t-c   I have this and fits under a S3 33 GTR with no issues. Purchased in 2009 and not one issue. It was $950 back then. Not cheap but something so important isn’t worth cheaping out on.
    • Just trying to get my head around this. At 5psi of boost, you turn on your wmi pump, and then you're using a 3000cc injector, to allow flow upto the actual engine, where you have your 6x200cc injectors and a 500cc injector. If the above is correct, what advantage are you obtaining by having the 3000cc injector blocking flow, is this just incase a line breaks between that injector and the motor you can stop flow immediately? Or are the 6x200cc and 500cc less injectors and just spray nozzle?
    • Welcome! New member myself, but I had an R33 back in 2002. Best advice I could give, based on my experience: if you're running the factory turbo, be very conservative with boost. I made the mistake of just fiddling around with the boost controller and cranking the boost for fun, and the end result was my intake pipes popping off frequently from the constant deluge of oil that was being blown into the recirc by the stressed-out turbo, which itself was siphoning oil from the engine and farting it out both sides of its centre bearing (or something to that effect). If I could do it all again, I would have gotten a new turbo and had a tune dialled in professionally and then just left it alone! Funny you mention the metal shavings in the gearbox, as I had the same thing - the probe plug (magnetic drain plug, essentially) would come out caked with shavings. At least it was doing its job. Not sure if that's just sacrificial wear and part of the deal, or if my gearbox was shagged, but I wasn't abusing it. Enjoy the R33 - they're a dying breed, and if they weren't $35k+ on CarSales in Queensland, I might have picked up one of those again, instead of the 370GT I own now (though I'm loving the 370GT, that big 3.7L V6 just hits different).
    • Howdy folks. I owned an R33 back in 2002, which was thoroughly beyond my capacity (financially speaking) to maintain/insure, so we parted ways in 2004. Fast forward 21 years (to literally yesterday, in fact) and I'm now the proud owner of a 2007 V36 370GT. I'm happily surprised by how much power the VQ37VHR makes, compared to the RB25DET, considering the latter is turbocharged. I had planned to add a turbo at some point but I'm on the fence about whether I'll even need it (though I do love the sudden onset of extra torque). Any other 370GT owners around the traps, I'd love to hear about your experiences with this car (good and bad).
×
×
  • Create New...