Jump to content
SAU Community

Recommended Posts

My 34gtt had a service recently and everything was ok besides front bushes. I think due to the front suspension being quite low, the front tension rod bushes are split and leaking? (obviously wear and tear also). Can anyone suggest what parts to put on to fix the problem? any rough cost estimate?

How big of a deal is this split and leaking? - just so i kno to either fix it this week or within the next few weeks...

I want to buy a set of coilovers, would that alone solve the problem? or is that different part altogether? sorry im a masive suspension noob!

Any help would be great!

Julz.

Edited by 1R34SON

Does your car pull to one side or wander over the road? Mine did with stuffed caster bushes.

With the bushes you can replace them with standard ones or go for adjustable ones. Most people go with adjustables, as this means you can increase the caster giving you more straight line stability and more camber while cornering. Whiteline, Superpro and Pedders all make adjustable caster bushes.

I paid $130 for adjustable bushes and $40 to get them press fitted, but I'm assuming you wont be doing the work yourself, so it'll be a little bit more than that when you factor in labour costs for rermoving the tension rods. Ring around and get some quotes

Btw, coilovers wont fix the problem at all - different part.

mine pulls to the left which i have been thinking is alignment, caster bushes and tension rod bushes are the same thing i presume? Thankyou for your help ill shop around then get quotes on install/fit cheers mate!

Yeah, caster bushes = tension rod bushes.

The worn bushes will be the reason it pulls to the left. If your bushes are split and leaking then obviously the cars aligment will be out.

Get the new bushes fitted and then get a wheel alignment. Should make the car alot nicer to drive.

Getting it sorted for roughly 300, 160 for bushes plus labour and another thing getting fixed included. lol mechanic showed me everything and explained bout the bushes. haha now I feel like a real idiot asking if new coilovers would fix it. Good to learn new things!

Cheers for the help!

Getting it sorted for roughly 300, 160 for bushes plus labour and another thing getting fixed included. lol mechanic showed me everything and explained bout the bushes. haha now I feel like a real idiot asking if new coilovers would fix it. Good to learn new things!

Cheers for the help!

No worries mate, seems like a fair price as well.

uhm

what exactly are the tension rod bushes leaking? =O

They are silicon filled, when they get old and start cracking the silicon starts to leak out.

They are silicon filled, when they get old and start cracking the silicon starts to leak out.

Very common with the standard bushes. Whiteline bushes fixed my problem a few years ago. So much better for it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...