Jump to content
SAU Community

Recommended Posts

2x700cc Sard injectors installed onto stock RB25 intake manifold + HKS AIC IV additional injector controller, excellent condition, all parts ready to bolt-on & tune - $500

NEW RB25 to greddy plenum using stock throttle body adapter kit - $100

q45 90mm throttle body, exc.cond - $150

RB25det stock cam shafts - $130 del, $100 p/up

RB25 stock cam gear cover - $50

RB25det stock exhaust cam gear pulley - $50

RB25det stock turbo dump pipe & stock front pipe $100 del, $50 p/up

pm me, all prices include delivery bar bold p/up for pick up discount

;)

all items are in excellent 100% perfect condition

again, pm me plz for more details

HKS AIC 4 additional injector controller series-4

DSCF0253.jpg

New Greddy throttle adapter kit for Greddy plenum

DSCF0136.jpg

Photo shows the sard injector (2x 700cc) on stock rb25 intake manifold, all other parts shown obviously not included

DSCF0137.jpg

brendan aka

Tangles

  • 2 weeks later...

done deal

still have left for sale:

2x700cc Sard injectors installed onto stock RB25 intake manifold + HKS AIC IV additional injector controller, excellent condition, all parts ready to bolt-on & tune - $500

New RB25 to greddy plenum using stock throttle body adapter kit - $100

RB25det stock cam shafts - $100 pick-up

RB25det stock exhaust cam gear pulley - $50

RB25det stock turbo dump pipe & stock front pipe $50 pick-up

RB25det stock head springs - $50

  • 2 weeks later...
You wouldn't by any chance have a GReddy plenum for sale? ;)

hahaha !

if I did it'd be on :P

when I bought my headgear last mid-year dollar was roughly equal, greddy plenums were $600 :thumbsup:

same price for my tomei poncams

greddy adapter is on hold pending sale

might NOT sell the injector setup..... want to experiment

:P

:)

:)

2x700cc Sard intake manifold + HKS AIC IV additional injector controller, excellent condition, all parts ready to bolt-on & tune - $500 del. (might keep and try)

RB25det stock cam shafts $100 p/up

RB25det stock exhaust cam gear pulley - $50 del.

RB25det stock turbo dump pipe & stock front pipe $50 p/up

RB25det S2 coilpacks, stock, $60 del.

2x700cc Sard intake manifold + HKS AIC IV additional injector controller, excellent condition, all parts ready to bolt-on & tune - $500 del. (might keep and try)

RB25det stock cam shafts $100 p/up

RB25det stock exhaust cam gear pulley - $50 del.

RB25det stock turbo dump pipe & stock front pipe $50 p/up

RB25det S2 coilpacks, stock, $60 del.

bump

  • 2 weeks later...

RB25det stock cam shafts $100 p/up

RB25det stock exhaust cam gear pulley - $50 del.

RB25det stock turbo dump pipe & stock front pipe $50 p/up

RB25det S2 coilpacks, stock, $60 del.

200cc Hummer 2006 dirtbike $500 good cond.

RB25det stock cam shafts $100 p/up

RB25det stock exhaust cam gear pulley - $50 del.

RB25det stock turbo dump pipe & stock front pipe $50 p/up - ON HOLD

200cc Hummer 2006 dirtbike $500 good cond.

Apexi fmic return-flow, $300 delivered

200cc bike sold and gone to new home

coilpacks gone

for sale still:

rb25det s2 stnd intake/exhaust camshafts - $90 ono + del

rb25det s2 stnd turbo dump pipe and front pipe - $40 ono + del

rb25det s2 stnd exhaust cam shaft gear pulley - $20 ono + del

hks aic4 additional injector controller and 2x700cc sard injectors on intake manifold, excellent condition - $500 + delivery

apexi intercooler, excellent condition, return feed, worth plenty, good for over 225kw - $250 + delivery

cheers

2x700cc Sard injectors installed onto stock RB25 intake manifold + HKS AIC IV additional injector controller, excellent condition, all parts ready to bolt-on & tune - $500

HKS AIC 4 additional injector controller series-4

DSCF0253.jpg

Photo shows the sard injector (2x 700cc) on stock rb25 intake manifold, all other parts shown obviously not included

DSCF0137.jpg

offers?

want a front faced intake manifold, instead of this which requires the stock intake manifold setup

  • 1 month later...

BUMP

NEW PRICE

$400 the LOT.

delivered or pickup

cheers

this is for the Intake Manifold, 2x 700cc Sard injectors, and the HKS AIC-IV additional injector controller

bargain

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Reading through the engine service manual their advice is do a cylinder balance test. Unplug one injector at a time and see if the idle drops a consistent RPM. You can also do this using a Consult cable which is easier. They also call for unplugging the power transistor, then with the engine off and the fuel rail unhooked from the manifold verifying that you have good fuel flow (even injection, no dripping/leaks, etc) when you twist the CAS by hand. Also verify the spark by pulling the spark plugs and allowing the plugs to ground and turning the CAS by hand. I would also start doing the sensor checks and idle valve checks in service manual. Make sure the MAF tests reasonably, the intake air regulator is sane, etc. You may have to get new spark plugs.
    • This sounds very old of me, however since buying the Tiguan shit box, my view on shit boxes have changed.
    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
×
×
  • Create New...