Jump to content
SAU Community

Recommended Posts

yeh pretty much as the title says, having a huge coolant leak from the back of the engine but havent been able to pinpoint where from.

had the car up an put copious amounts of fluid through the radiator and it pisses out the back and from what i can see it gushes out above the gearbox, but there is jus sfa room to have a look where its coming from? ;) any one else similar problem?

i've searched not only this but a few other forums but havent been able to get an answer. jus hoping i could get some sort of an idea before i take it in to a mechanic

cheers for any help

Link to comment
https://www.sau.com.au/forums/topic/253295-r33-s2-leaking-coolant/
Share on other sites

water pump leaking? that tends to be sign of "change me"

hoses to the firewall leaking? ( passenger side)

The drain plug on the engine blow which is on the passenger side leaking?

cant think of much else which could be contributing to a radiator leak at the back of the engine..

Edited by br3ndan
heater hoses

but more than likely the turbo water feed from the back of the plenum.

thats what i was thinking but hoping it wasnt..

thanks for all the help guys will try get some time after work and have a look and take some photos

ok had another look after work today but started to piss down so didnt get much time but its not pump, not the hoses to the firewall im pretty sure its either the heater hoses or the water feed but cant quiet see, pretty sure i've got it pin pointed at the bottom right hand side of the block as u look at it head on.

Taso84 what did you end up having to do with yours?

thanks for any help

this is an absolute broad minded person of a job but you have to do it man

when i did it, it was on my mates s12 w/sr20 conversion and there is NO ROOM at the back

we had to remove the plenum to properly access the hoses

here is a tip: if your struggling undo the gearbox mount and jack the gearbox up higher, it will slope the engine downwards and give you a bit more room to work

here is a pic of the hose i had to replace

post-42017-1232452462_thumb.jpg

sh*t from what i've read this will be aprick of a job or a hit to the back pocket. yeh tell me bout the lack of room its crazy!

yeh i figured i'd be taking some stuff off/out, thanks for the help gfunkk.

jus gunna grab a mate or two and a case an see how we go this weekend i reckon.

cheers for the help fellas

bottom right of an RB - only water above that are heater hoses and the steel turbo feed line.

Or a welsh plug in the block...

go to a mechs and see if they can pressurise your coolant system to allow you to check it exactly.. then see if you want to fix yourself or not

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...