Jump to content
SAU Community

Recommended Posts

ok so heres a bit of info

Just picked em up

P1150025.jpg

P1150027.jpg

grabbed some purple as well

P1150026.jpg

brad had to take some meat from the turbine housings to match to the new manifolds

P1150031.jpg

P1150032.jpg

as you can see below a fair bit had to go

P1150033.jpg

installing the new studs

P1150034.jpg

dumps joined

P1150035.jpg

manifolds attached

P1160037.jpg

P1160038.jpg

P1160039.jpg

nice pair

P1160040.jpg

Hmm i can see why there is no point in putting manifolds with small low mounts.. happy sticking with stockers now!

The size difference from that rear housing to the manifold gasket is huge!!!

very nice i have just started to do the same thing with my car atm going the same turbos to :P

any tips for taking them off?

run into any problems fitting them?

i have heard you have to do some mods to the oil return holes?

were did you get your gaskits from?

did you buy a kit?

or just get them from nissan?

can not wait to get mine on there and tuned!!!! :blink:

very nice i have just started to do the same thing with my car atm going the same turbos to :P

any tips for taking them off? - not really just keep your cool lol

run into any problems fitting them? - just doing up the bolts for the manifold when reinstalling

i have heard you have to do some mods to the oil return holes? - yes just drill the bolt holes a bit bigger to match the holes on the turbo thats what i did

were did you get your gaskits from? - kudos motorsports trader on here tell him jason sent you

did you buy a kit? - from kudos motorsports

or just get them from nissan? - lol no

can not wait to get mine on there and tuned!!!! :blink:

Looks the goods mate :laugh: Im very interested to see what numbers you pull! I had a set of these put on my car 2 weeks ago and made 258rwkw on 14 psi and 316rwkw on 18psi on a Mainline dyno, but i used match ported standard manifolds and HKS split dumps and D-Jectro. Good luck and i hope all goes well :)

Yep I got the tomeii stainless manifolds and port matched to the turbine, it's worth doing it on the standard manifolds too as it's a major restriction as stock. You get a much better spool response. Ported like in this pic. Gonna have to do a side by side soon Jase! Here's also the CES race dumps for those interested.....

post-48345-1232448521_thumb.jpg

post-48345-1232448986_thumb.jpg

Edited by doo doo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
    • Sounds good, we will aim to be there! @The Bogan I'll give you a shout if you are heading up to campbelltown for the meet too.
    • Before I get to the test day, just to finish off the android head unit. This is a demo from car start up....the standard/host system takes a few seconds to boot (same as all v37) but Android comes up quickly. In this vid I'm using the delivered launcher but have set the default to Agami since which is easier to navigate when if use primarily 5 apps. You can see the host system still takes over when required eg putting it in reverse, and you can switch between Android and not by holding the back button 3 sec. It is pretty responsive (fast) but you can see I had to press harder than expected a couple of times.  I still have the phone connected to the stock system, and that also seamlessly takes over Android music playing. v37-android-demo.mp4 The bigger reason that I put this in though is so that I can use Ecutek directly on the head unit. That gives me a dash with logging (up to 20MB only), high and low value warnings on any parameter etc etc. I've run a USB cable from the Ecutek OBD dongle to a USB input on the unit, easy. v37-ecutek-demo.mp4   The unit did freeze on the launcher the other day, I think Agami was trying to verify the license when it didn't have a data connection...will monitor and report back if there are any other problems but so far I'm very happy with the upgrade.
    • Nah that is just crappy GPS mapping, I did have a small excursion (cold tyres, damp track, surprise!), will post up that when I get a chance.
    • So 10/10 times that code is coil packs? I mean if that's the case ill drop the $400USD or so to replace them. I didn't know these cars threw codes before the issue became an issue.
×
×
  • Create New...