Jump to content
SAU Community

Recommended Posts

ok so heres a bit of info

Just picked em up

P1150025.jpg

P1150027.jpg

grabbed some purple as well

P1150026.jpg

brad had to take some meat from the turbine housings to match to the new manifolds

P1150031.jpg

P1150032.jpg

as you can see below a fair bit had to go

P1150033.jpg

installing the new studs

P1150034.jpg

dumps joined

P1150035.jpg

manifolds attached

P1160037.jpg

P1160038.jpg

P1160039.jpg

nice pair

P1160040.jpg

Hmm i can see why there is no point in putting manifolds with small low mounts.. happy sticking with stockers now!

The size difference from that rear housing to the manifold gasket is huge!!!

very nice i have just started to do the same thing with my car atm going the same turbos to :P

any tips for taking them off?

run into any problems fitting them?

i have heard you have to do some mods to the oil return holes?

were did you get your gaskits from?

did you buy a kit?

or just get them from nissan?

can not wait to get mine on there and tuned!!!! :blink:

very nice i have just started to do the same thing with my car atm going the same turbos to :P

any tips for taking them off? - not really just keep your cool lol

run into any problems fitting them? - just doing up the bolts for the manifold when reinstalling

i have heard you have to do some mods to the oil return holes? - yes just drill the bolt holes a bit bigger to match the holes on the turbo thats what i did

were did you get your gaskits from? - kudos motorsports trader on here tell him jason sent you

did you buy a kit? - from kudos motorsports

or just get them from nissan? - lol no

can not wait to get mine on there and tuned!!!! :blink:

Looks the goods mate :laugh: Im very interested to see what numbers you pull! I had a set of these put on my car 2 weeks ago and made 258rwkw on 14 psi and 316rwkw on 18psi on a Mainline dyno, but i used match ported standard manifolds and HKS split dumps and D-Jectro. Good luck and i hope all goes well :)

Yep I got the tomeii stainless manifolds and port matched to the turbine, it's worth doing it on the standard manifolds too as it's a major restriction as stock. You get a much better spool response. Ported like in this pic. Gonna have to do a side by side soon Jase! Here's also the CES race dumps for those interested.....

post-48345-1232448521_thumb.jpg

post-48345-1232448986_thumb.jpg

Edited by doo doo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
    • Why are you so adamant on going M12? Why not follow Brad (GTSBoy) suggestion. You're talking moving from a 1/8" size, to a 1/2" effectively. 4 times bigger. Why skip the commonly available sizes in between? The bigger you go, the more likely you are to strip the threads out at a later date, as guaranteed, someone will put a huge spanner on the M12 and really tighten it up, and you're only in thin wall, so not a lot of threads to engage!
    • Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
    • Probably gonna remove manifold and turbo. I’m not sure if I can get M12 x 1.5 air tight. Could use high temp Loctite 246 or something similar, but I don’t know. Maybe it’s just best to remove everything again and weld an 1/8NPT on there instead.
    • Yeah, saw the ratios, not impressed. Would like the punch I have in the first gears now. With those ratios it won't be the same.  Also want the h pattern gearing, or at least a quiet gear set that don't need to come apart for service each year. Looks like the only "reasonable" way Is a 8hp70 transmission, but where is the fun in that🤷‍♂️
×
×
  • Create New...