Jump to content
SAU Community

Recommended Posts

Are we just talking about GTR's here, or the entire gammit of cars?

PFC's out of the box can start all imports first time, it will more then likely be a ping-master due to it being tuned for Jap fuel though.

Originally posted by EVL R33

I think if you polled the number of PFC users compared to Wolf users the stats would tell you otherwise..  :P

For mild to mid modded cars either one is more than capable,  but once you start getting serious most people don't use either of these.

How good is the standard maps in the wolf?  Is it as plug and play as the PFC???

Brett

  • Replies 94
  • Created
  • Last Reply

Top Posters In This Topic

No I don't believe the Wolf comes with a pre-loaded map, but seeing as you get given software you can simply download a map from someone who is running similar spec to you:D

And yes, I think if you did a pole in WA you would see which way the wind is blowing:D

An arguement which could go on forever depending on which ecu you prefer. :P

No doubt the Wolf is gaining popularity, but PFC would still have more users atm, may change in the future who knows.. Like someone else said most shops shy away from Wolf (some won't do PFC either) because they prefer other stuff. More shops will suggest PFC over wolf which probably explains the higher users.. Though more and more shops are telling you to go for Autronic or Motec (read shitloads of money)...

6 of one half a dozen of the other IMO

The PowerFC are a good computer, and up until recently the import market hasn't had much competition, it's nice to finally have some choice in ECU's.

I totally agree that each workshop will lean towards what they want to sell, because they feel more comfortable tuning it, and aslong as it makes the power without blowing up then all is good:D

I really think that Apexi should release the laptop software though, I see it as a major drawback IMHO, as not everyone has access to a Datalogit.

Agree wholeheartedly, if the factory PFC software was available in english it would be a much more rounded package with even less flaws it currently has...

Still, if Steve could hire a Japanese speaking (reading) mechanic and we can somehow get the software from Japan we are in business lol

Fabian has found the limits of his PFC and is changing it soon.

Wolf GTR Plugins are out this week and were putting one in Ants Killer.Plugins do come mapped now amd MAP sensor are fine on road cars and many factory cars are on MAP like Supras and many other Toyotas and lots of Holdens and 6 cyl Falcons ETC.

Some of the shops that bag Wolfs have tryed to be dealers but get knocked back. Wheelspin ,Xspeed, Regional motorsport and Maitland performance + Works now sell Wolf for us.

Wolf would easy be the most used ECUs in WA ( I sold 18 last week)

the picture on the left i believe is from there....i need to take another pic...

a mate bought the car in feb and sold it to me as he went up to the mines...

thanks for the input guys i'll be going the front/dump pipe first then mebbe a high flow cat and then the wolf then the fmic me thinks....this the correct order everyone reckon?

i would go the safc kim but i figured why half do the job why not just go the extra money and save upgrading again in the future....

Fane,

Prolly go the Dump/Front + Cat, then FMIC, then wolf :rolleyes: It'll let you have some fun upping the boost before you fork out the mega-fold for a Wolf :)

And Yep, your completely right, if your power goals warrant a wolf, then why settle for an AFC?

That said, there's a market for AFCs if you were to upgrade to a Wolf later, like so many other's have :D

Good Luck with the mods :D

Paul,

That said it should be pointed out that with the stock cooler I wouldn't push it past 11psi, I keep mine on 10psi. Simply because the pressure drop across the Stock IC is rediculously high.

With a frontmount I dont see 13-14psi being an issue :rolleyes:

Fane,

Could be misfiring, could be boost cut, could be faulty AFM, could be too much fuel, next time I see ya take me for a drive and we'll try a few things out. I had the same problem. Most of it is gone now after the AFC though :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, this is probably where a wiring diagram and a multimeter come into play.
    • I can say to anyone thats doing this; having done a number of R clusters; just be careful if its an unknown cluster.  It takes a bit of force to pull up; but if it feels excessive then its probably stuck. I've had this and pulled the entire hair spring out; and I can tell you; its not easy getting the correct spring replacement with the correct inner diameter and winding. In my case someone had used some sort of adhesive to stick it to the spindle and it pulled the whole spindle out; which the force seperated the hairspring from the spindal and caused it to deform.  You may have to clean it (IPA); or in my case if i'd known i should have used some sort of solvent on it.  Also check out Cruizin Central on eBay. He does all sorts of dials; and you can email him with any custom designs you want. So if you want like certain logos etc...he'll send you a mock of what it will look like then you accept the order and he'll take care of the rest. Fantastic dials and he can do basically any design you want. 
    • Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
    • Ive converted a few clusters for the R33 with 320km/h dials. On the back there are some pads which can be bridged or unbridged (using solder or wick braid) to calibrate it. There is one bridge which is for MPH <> KPH; and there are combinations of bridges to offset it. There is probably a diagram  For example; this is my conversion for a 180km/h dial to a 320km/h dial (I put custom GT-R dials on it with the GTS25t layout) If you have J2 soldered (assuming the S clusters have a similar config to the R clusters); you may need to remove that solder
    • Back on topic 😉, these are some of the notable pages from the booklets that are supplied with each weekly parts update. I never knew the BNR32 test mule car had an S13 Silvia front end... *Edit: On closer inspection the test car still had the R32 body, but only the front end had Silvia panels etc.
×
×
  • Create New...