Jump to content
SAU Community

Recommended Posts

I got R33 2 door coupe shell for sell .95 model turbo manual previously , with small damage on the back /was quoted 800$ to repair .Car was complied and registered in QLD previously and is NOT in written off register or any record of accident .

It has all interior parts dash,seats,door trims etc etc , missing instrument cluster .

Has ** brakes, diff ,hubs all on ,computer loom still in .

** Has full suspension with king springs all round fitted not long ago

** Has a near new Front Whiteline Swaybar

** Has a tight r200 viscous diff

** Good turbo brakes all round everything in driveline complete just missing drive shaft.

** front headlights need some small repair and rear tail light .

**Front and rear bars

**all windows in place

** all locks still there and lots of other [parts still there

missing front bonnet and front grill.

NO engine or box or tail shaft , so please dont ask for this parts .

Car is still on wheels but u must to bring ur own wheels .

Whole lot $ 1900 in south of Brisbane , or will start parting whole car , but hubs will go last as I can still keep car/shell moving around .

Can be delivered in surrounding areas up to 100 ks for fuel cost .

More pics can be made on request.

post-18510-1232843604_thumb.jpg

Edited by familka gtr
Link to comment
https://www.sau.com.au/forums/topic/254061-r33-series-i-rolling-complete-shell/
Share on other sites

hey mate is it a series 1 or 2? are you willing to seperate the rad support?

Its series I .

At that stage I am not wiling to separate shell , just posted today , but if I am not sell within 2 weeks I will separate shell as well .In next few days only wiling to sell interior parts or so or whole lot.

You got over 3500$ worth easy to sell parts of it so why u dont buy whole lot and then cut what u need and sell rest .

Japaneese motorsport selling uncomplied,just bare shell / no doors,bonets,driveline,windows/ nothingh just bare shell only for 3500$ so compare mine is 1900 just stiling .

So if u are interested in it bring 1900$ firm and ur own wheels and u can tow it away.

sorry just realised you said your not interested in parting it out yet, if it gets to that stage, let me know

[/quote

Yes Michael atm I dont want to part car yet as maybe somebody is interested in whole shell.

Anyway , windows is in great condition , nothing wrong with them , in case I want to take them out I will use profy glass cutter guy to take them out as I dont have knife for it .Prefer to organize by buyer , but if u are interstate ...

didbt get in the price of them as well so send me offer by PM and we will see soon.

hey mate are any of the electronics still in the car because i am chasing the whole drivers side door (switch, relay box, loom) if you decide to seperate the car PM me.

Cheers

hey mate are any of the electronics still in the car because i am chasing the whole drivers side door (switch, relay box, loom) if you decide to seperate the car PM me.

Cheers

I do have relay box spare one , and one with different plug/ small one / with remote control antenna - maybe ser II ?? not sure with wiring as well ,switch is here , but never get the chance to try as I bought already without engine and battery was gone and what exact loom do u need .make me an offer and I will decide .

  • 3 weeks later...
I got R33 2 door coupe shell for sell .95 model turbo manual previously , with small damage on the back /was quoted 800$ to repair .Car was complied and registered in QLD previously and is NOT in written off register or any record of accident .

It has all interior parts dash,seats,door trims etc etc , missing instrument cluster .

Has ** brakes, diff ,hubs all on ,computer loom still in .

** Has full suspension with king springs all round fitted not long ago

** Has a near new Front Whiteline Swaybar

** Has a tight r200 viscous diff

** Good turbo brakes all round everything in driveline complete just missing drive shaft.

** front headlights need some small repair and rear tail light .

**Front and rear bars

**all windows in place

** all locks still there and lots of other [parts still there

missing front bonnet and front grill.

NO engine or box or tail shaft , so please dont ask for this parts .

Car is still on wheels but u must to bring ur own wheels .

Whole lot $ 1900 in south of Brisbane , or will start parting whole car , but hubs will go last as I can still keep car/shell moving around .

Can be delivered in surrounding areas up to 100 ks for fuel cost .

More pics can be made on request.

post-18510-1232843604_thumb.jpg

Personally i would love to see the quote you got to repair that one for $800. No way is all i can say.

Regards

Personally i would love to see the quote you got to repair that one for $800. No way is all i can say.

Regards

So dont say nothing if u didnt see it.

U got panelbeaters who repair same damage for maybe 3000 $ thats probably shops where are repaired ur cars and I got panelbeater who repair this damage for 800$ , thats the shop I got repair my cars.

  • 5 months later...
  • 3 weeks later...
im interested in the hubs and brake package.will u part it?

and whats ur price?pm me

sorry man I sold long time ago , but I do have full set of brakes for R32 GTR - rotors/calipers for 600$

Or I do have full set of R34 hubs,rotors,calipers etc etc - make me an offer .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
    • The axels in my R33 seem tired, and have a bit of play in them. I cannot find any new of course, not interested in buying used, but I am looking to see if anyone can identify some cross compatible axles. In the states I have seen suggested for S chassis the J30 axles, however for the skyline (as best I can tell) the lengths are about an inch off (2.5cm) on both sides. R33 my measure L 22" R 24.5" GPT L 22.5" 24.25" J30 L 23.5" 25.5"  so shaft length is probably an inch wider. Not sure if someone has another still remanufactured option besides the J30. I figured worst case I can buy a pair tear them down and swap the center shaft. My other option was reaching out to GSP to see if they cannot piece together a set, since the axle stubs are still manufactured, I wouldn't think it be that hard to find a shaft or make a shaft work. 
×
×
  • Create New...