Jump to content
SAU Community

Recommended Posts

Guys,

any idea what a good weight distrabution for an R32 GTR is i have weighed mine and have roughly a 58% front / 42% rear split and a diagonal weight difference of 18 kgs with driver and fuel.

Anyone else played around with this?

Link to comment
https://www.sau.com.au/forums/topic/254119-r32-gtr-weights-splits/
Share on other sites

about to do mine in the next few weeks....I will post up too. GTR is too nose heavy but we will do what we can.

I spoke to someone about this the other day - apparently all the super cars run lead because left to right balance is more important than overall weight...interesting to consider.

  • 2 weeks later...

Ok another go at the corner weights this weekend.

With driver and full fuel load i got the following.

front left 415kg

front right 444kg

rear left 291

rear right 309

So that is a FR to RL total of 735 kg and a FL to RR of 724kg

I cant get it any better without moving some the gear already installed into the car, so next week i start cutting the fuel cell, pumps mounting brakets and fire extingister and getting them all to the rear left corner. Once i get that corner heavier i will be able be able to better balance out the entire car

  • 4 weeks later...

Well as promised here are the results from mine.

First thing I notice is that your car is a full 100kg lighter than mine so well done. the numbers are pretty depressing but meh.

FL 433kg

FR 471kg

RL 307kg

RR 346kg

That gives me diagonal cross weights of 779.5kg vs 780.5kg. Nick has a pretty good eye for setting this up.

Ride heights to acheive that guard to bottom of wheel (with 17" wheels) is:

FL 570

FR 575

RL 565

RR 567

So basically they focus on getting the diagonal weights right because that is where the wieght shifts on your average corner turn in under brakes. He did this by managing the ride height at each corner not by moving stuff inside. And its amazing that .5cm of difference in ride height makes up for 38kg in weight difference.

Also its painful to note that the front to rear distribution is 904F to 653R = 60%F 40%R

So... FR takes 1.5x the weight of the rear right. so anyone that tells you that they need larger rear tyres on a gtr is very much on drugs. given that generally gtr owners run same size wheels all around, and that the main weight shift is under brakes, the fronts will always be the tyres working hardest (this matches with what I have seen in tyre wear and tyre pressures)

  • 2 weeks later...
. He did this by managing the ride height at each corner not by moving stuff inside. And its amazing that .5cm of difference in ride height makes up for 38kg in weight difference.

Exactly. I would have thought ride heights will have the biggest impact on the corneer weights. Remember, the chassis is meant to be rigid, so you can't really change corner weights any other way. Front to back is a different matter, so the more crap you can mount in the back, the better.

This stuff makes me cry.

Mine is still full weight ie stereo, interior etc with just a few things done to help matters eg HICAS.

Front is 905kg

Rear is 685kg.

Which gives a distribution of 57/43.

I should point out that I weigh 100kg with helmet etc.

Sorrt of explains why the things understeer so hard.

yes duncan i have removed every bloody thing possible even down to alloy bolts if its not load bearing.

I plan to get a full T45 cage in over summer here and a wide body kit i have to do something to catch the bloody viper Z06 GT2 etc

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...