Jump to content
SAU Community

Recommended Posts

what are the differences? man i really gotta go to a tyre place and ask

i dont wanna chew em up quickly but i do want maximum performance out of em in everyway really

drag + street + track

but ill probably have to decide on one way or another or just get a good set for my stokies

less agressive tread pattern, different compound (will have less maximum grip, but will have a lower heat range so dont need to be warmed up as much, but will get greasy at higher temps quicker, also wont wear as quickly)

Whatever tyre came std on STIs on the old model STIs is a good thing. I think they are Bridgestone RE050s, they are what i have on th eback now and they are plenty grippy and a very good tyre. I think they may have been replaced by RE01s, at the end of the day they are similar prices to semi slicks but are better wearing, quieter and better in the cold and wet

lol define all rounder, u say that to a tyre shop and they will fit u with these:

http://www.bobjane.com.au/Tyres_range/tyre...p?mk=1&md=0

if ur after maximum performance on street and track then go with the RE-01R, Direzza Z1or AD07 imo, if ur after a tyre which will give u best performance on track but be legal to drive on the street with, go the RE55s.

Whatever tyre came std on STIs on the old model STIs is a good thing. I think they are Bridgestone RE050s, they are what i have on th eback now and they are plenty grippy and a very good tyre. I think they may have been replaced by RE01s, at the end of the day they are similar prices to semi slicks but are better wearing, quieter and better in the cold and wet

yep, RE050's, although i think they are running the improved RE050A model (quite a big difference). same tyre the 17" VX/VZ commies and 18" VE's run i beleive. they are quite a good tyre, but not the same level as RE-01's. they also have poor tread wear, besides wearing quickly they tend to wear unevenly (quicker on the shoulders).

they are a good tyre, but waaay overpriced if you ask me.. i had them on my 33 (picked em up 2nd hand) and them oem on my ss... chewed em up all round and priced another set and it was nearly $350 a tyre for 235/35/18s.. got some kuhmos instead at $235 a tyre delivered and didnt notice much difference at all on the ute, and it 300kw at the wheels.

as for the r32... mine was standard when i got it, only upgrade is coilovers and pineapples... handles like garbage... putting it down to the balloons that its rolling around on... 205/55/16 on a 6.5 rim makes for alot of instability... it just doesnt feel flat around corners... like if you were standing on a plank of wood with a balloon under it.. the board is stiff, but cant get it to the ground..

so my 2c is to keep the stocker suspension at the moment, get some swaybars and bigger wheels and tyres. the stock suspension will help you launch and with swaybars and grippy tyres wil be enough to keep you on the black stuff.

Edited by NZM.031
  • 2 weeks later...

ok i went to bob janes yesterday there's a young bloke in there that has an Ls1 making round the 400rwkw mark

i spoke to him about my beast and he recommended me get the:

bridgestone RE001 Called Adrenalins.

he recons to do this before getting new rims obviously i have my stock rims still

he said bang for buck is these for sure he swears by them for street and every now and then track

just wanna know what you guys think?

they are 225/50/16 for the back cost $235 each

and for the front 205/50/16 cost $220 each

Ive got 17x8 on the front with +30 offset.

With 235/45 tyres it scrubbed, 225/45 no more tyre scrub

Ive got 17x9 on the rear with +30 offset.

With 235/45 tyres they scrub on the back if I have people in the back.

Although this could be due to my shocks being worn out, will update with info once I get new suspension.

I'll be aiming for the Sydneykid's bilstein shocks and whiteline springs package ($1300~)

I reckon pick up a set of r32 GTR rims and get some Adrenalins for them. Would be better than the stock gtst rims you got now.

yeah not sure if i wanna spend heaps just yet might try good set of tyres first on the stockies

hey rekin are you going to the dyno day sat 21st of feb kamikaze motors nunawading?

free calendar and $40 for a dyno run

yeah not sure if i wanna spend heaps just yet might try good set of tyres first on the stockies

hey rekin are you going to the dyno day sat 21st of feb kamikaze motors nunawading?

free calendar and $40 for a dyno run

im iffy about spending good tyre money on your stockies cause they can only provide so much grip.

I reckon pick up a set of r32 gtr rims for $500 and then buy proper tyres for them.

Look on the bright side, least you dont have 17inch rims, Adrenalins are $320 per tyre :D

ok i went to bob janes yesterday there's a young bloke in there that has an Ls1 making round the 400rwkw mark

i spoke to him about my beast and he recommended me get the:

bridgestone RE001 Called Adrenalins.

he recons to do this before getting new rims obviously i have my stock rims still

he said bang for buck is these for sure he swears by them for street and every now and then track

just wanna know what you guys think?

they are 225/50/16 for the back cost $235 each

and for the front 205/50/16 cost $220 each

RE001's are good, nothing amazing, but will do the job. id also look at ur dunlop options, something like Sport Maxx's

I've very recently gone from 225/45/17 fronts and 235/45/17 rears on 17x7.5 +40 rims, to 235/40/18 all round on 18x8 +30 rims. Ride is *slightly* harsher but feels so much more stable and predictable, slightly less traction but feels more pointable (if that makes sense :)).

Oh and that's 595SS's on both the 17s and 18s.

the stocker rims are just too skinny to waste tyre money.. even if you come across some 16x8s at an importer or something for $500.. you can always find cheap rims if you look hard enough. the other option is find some second hand semi slicks... there was some on here, 2 only, $100.. and there were some on light enkei rims for $500... or it may have been $500 for the tyres alone.. but they were like new.

check for good tyre deals on ebay aswell.. at this stage its not worth spending a motza on tyres..

i just got some 17's and threw whatever tyres i had laying around on them, but they are all low profile, and stretched on... rears are different to each other and fronts arent anything special... but the handling and feedback through the car has improved alot, but grip has gone down.. ill get some decent tyres later.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
×
×
  • Create New...