Jump to content
SAU Community

Group Buy : Motul 300v 10w40 (victoria Only)


Recommended Posts

MOTUL 300V 10w40 $89 for 4 L rrp $109 i will need about 15 people for this to go ahead no money up front will be needed

just leave your name if your 100% interested at the end of it i will get stock sent to

STATUS TUNING

63 Rodeo Drive

South Dandenong

Phone: (03) 9792 3333

Fax: (03) 9792 5555

E-Mail: [email protected]

OPEN 9.30am - 6.30pm Monday to Friday

(victoria) and can be paided and picked up from there

i will leave this up for 1 month from the 27/01/09 - 27/02/09

stock is coming from link international in Queensland

cheers

300V CHRONO

10W40

New 300V series is racing lubricant for racing cars.

MOTUL has developed “Double Ester Technology” for new 300V series, superior to complex ester that recognized the best base oil for engine oil up to now. Double Ester Technology, made by carefully balancing the ratio of complex ester and the newly developed macromolecular high polymer ester, enable base oil more wide-ranged, and delivers high output performance and superior reliability.

Also by carefully selecting the right polymer, “0% shear loss*” can be achieved.

*Diesel Injector method (CEC L-14-A-93), a standardized testing procedure for a lubricant’s shearing force.

Can be mixed with another viscosity of same series to achieve most suitable viscosity for the engine. (except for 5W-40)

* All-round use, designed for handling stable oil pressure preservation and sharp response.

* Compatible with a wide selection of engines — naturally aspirated, high torque turbo and cars that produce average to high levels of exhaust fumes.

SPECIFICATIONS

Product 300V CHRONO

Feature 100% Synthetic, Double Ester Technology, 0% Shear loss, can mix, for cars only.

SAE/DOT Standard 10W40

Specification Exceeds all existing standards

Maker's Approval —

Compatibility For a wide selection of engines — naturally aspirated, high torque turbo and cars that produce average to high levels of exhaust fumes

post-6642-1232982378_thumb.jpg

Why is it that motul dont make any of the 300V in 5L's? I asked the link rep last time he was up in our store and he didn't really know. Is there a reason for it? Always wondered about this.

  • 3 weeks later...
  • 2 weeks later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...