Jump to content
SAU Community

Recommended Posts

Hi....

As I sat in the back seat of my 350GT, watching some por....er....some docos...a few weeks ago, I was amazed at what I saw around me....SRS labeling all around me...(not to mention those cool push in/out clothes hangers!...never noticed those before!)

I'd like to know more about our 35's active/SRS devices, and what would actually happen if we were involved in a collision with a wall, at say, 50-60km/h....(or use your own experiences)....how many bags have we actually got onboard?

What/how does our Active Headrest system do/work?..in practical terms.....and maybe even include your own unfortunate experiences.

Please do include, if you can, how the pre-tensioner system works in with all this....maybe explained on some sort of expanded timeline?....(so dicks like me can understand).

I know this could get quite technical and potentially a laborious task to answer, but I assure you, I'd really appreciate your thoughts and skill-sets on this topic.....especially from our 'V' community.

Thanx ahead!...

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/254287-active-headrest-srs-in-practise/
Share on other sites

according to the V35 brochure the active headrest will tilt forward in the event of an accident, which is to reduce the chance of whiplash effect on your neck.

as usual seat bolster have SRS airbag, as well as curtain airbags on your B pillars, and the usual passenger and driver airbags. it is quite a good car in terms of safety features. ABS, VDC, you name it.

  • 2 weeks later...

Ok,

So here it is in a sort of timeline that I take it you're after.

When you crash into a wall (or another car) at 50~60 km/h, several things happen:

1) Car detects massive deceleration through sensors in bumper/ front end.

2) Car computer recieves the deceleration information from the sensors and processes it, sending commands to the safety systems throughout the car.

3)Seatbelt pretensioner's fire, pulling the seatbelt's tight around your body, helping it to stay 'with' the seat and give it a more controled deceleration.

4) The the airbags inflate, as the airbags inflate, the active headrests move forward (and upwards in some cars) so they stay closer to your head to control the rearward motion at the end of the crash.

5) If the forces of the crash through the seatbelts exceed the safe limits that the human body can withstand, the force limiters built into the seatbelt base, (either where the seatbelts attach to the chassis OR where they attach to the pretensioner/ inertia reel mounts) will "release" reducing the force applied to your body by the seatbelts. Most of the time, the force limiters are built to work in the same action that the lid peels off a sardine can.

This is a pretty basic description of how it works so I apoligize if it doesn't seem exactly correct, but if you have any other questions about what I've tried to explain, ask me and I'll explain it in more detail :thumbsup:

Ok,

So here it is in a sort of timeline that I take it you're after.

When you crash into a wall (or another car) at 50~60 km/h, several things happen:

1) Car detects massive deceleration through sensors in bumper/ front end.

2) Car computer recieves the deceleration information from the sensors and processes it, sending commands to the safety systems throughout the car.

3)Seatbelt pretensioner's fire, pulling the seatbelt's tight around your body, helping it to stay 'with' the seat and give it a more controled deceleration.

4) The the airbags inflate, as the airbags inflate, the active headrests move forward (and upwards in some cars) so they stay closer to your head to control the rearward motion at the end of the crash.

5) If the forces of the crash through the seatbelts exceed the safe limits that the human body can withstand, the force limiters built into the seatbelt base, (either where the seatbelts attach to the chassis OR where they attach to the pretensioner/ inertia reel mounts) will "release" reducing the force applied to your body by the seatbelts. Most of the time, the force limiters are built to work in the same action that the lid peels off a sardine can.

This is a pretty basic description of how it works so I apoligize if it doesn't seem exactly correct, but if you have any other questions about what I've tried to explain, ask me and I'll explain it in more detail :P

goin down on ya NS!!!! :down:

Mate, this is great, and exactly what I wanted, and in terms that even a knob like me can understand!

Thankyou for putting in so much effort!..I do appreciate it!..(see first sentence!!)..lol!

Cheers! :D

ps...does the airbag 'check light' indicator mean that all of these systems are checked/initialized when we start our cars?

If there is a fault anywhere within this complex system, will we know?..(before we have crash!)

goin down on ya NS!!!! :down:

Mate, this is great, and exactly what I wanted, and in terms that even a knob like me can understand!

Thankyou for putting in so much effort!..I do appreciate it!..(see first sentence!!)..lol!

Cheers! :P

ps...does the airbag 'check light' indicator mean that all of these systems are checked/initialized when we start our cars?

If there is a fault anywhere within this complex system, will we know?..(before we have crash!)

Haha, all good, glad I could help.

Yea, I'm not sure if the "airbag" light would cover the active headrest system and the seatbelts, but it certainly would cover the airbags. If the light is an SRS light then it should cover the pretensioners and head rests as well. being that they are both part of the Suplimental Restraint System.

I did a bit of work on a sedan tonight regarding this. for a 2001 v35 I saw (and checked) pass airbag,drv airbag, pretensioners - all checked ok.

if there is ANY fault with the system them the light will flash until the fault is cleared. the system checks itself everytime the ign is turned on and started. if there is a serious fault then doing a diagnostic scan on it is the only way to sort it.I had one came back with a short on the drivers air bag. that was due to the thing not being properly plugged in and the contacts on the bag were closed ( they do this as a safety precaution.) temporarily and the system logged a fault.

about 2 weeks out of christmas some idiot smashed into me while he was doing a U-turn from a stopped postion curbside (i was doing about 50-60kms driving up my street).. left hand side of the car was all smashed from the start of the door all tha way back to the rear bumper(just wasnt touched).

as the accident happened. about 1 second total, there was a loud bang, car slid sideways, VDC helped to pull it straight and i was pulled over on the gutter about 10-15m from where the accident occured. airbags delpoyed, so fast i had no idea they had come out until i pulled over as only the passenger side airbag(from inside the side of the seat through the leather) and the passenger curtain airbag (Dropped down from above the window) deployed as is was a side impact..

i have the highest praise for the safety features in the V35 and we should all feel very safe driving these..

there were cars parked all down the road and i wouldnt be supprised that if the car didnt have some of these features i verywell could have wound up in a car on the otherside of the road..

now as for repairs.. :)

repair costis $10,700

all parts inc panels, new seat cover for the entire passengerside backrest, and new roof lining etc.

i only just got the car into the repairshop on the 26th of jan and the accident happened on the 14th of dec.. this was because we had the wait for parts.. still all the parts havent arrived and its currently the 13th of feb. they told me i shoud be able to get the car back around the 20th of feb but im not crossing my fingures.. so thats about 2 and a half months in repairs.. so i dont recommend smashing up your V :P

dont get me wrong i knew repairs would take a while etc as we all do.. but jus some food for thought.. and YES im going to keep the V once repaired and continue modifying it and YES the car is comprehensivly insured and was the other drivers fault so no cost for me!!

cheers i'll shut up now :)

kari

P.s. sorry i had some photos but i jumped in the pool the oterh week with my phone in my pocket so now i dont have them anymore :D

Edited by t0rpy
about 2 weeks out of christmas some idiot smashed into me while he was doing a U-turn from a stopped postion curbside (i was doing about 50-60kms driving up my street).. left hand side of the car was all smashed from the start of the door all tha way back to the rear bumper(just wasnt touched).

as the accident happened. about 1 second total, there was a loud bang, car slid sideways, VDC helped to pull it straight and i was pulled over on the gutter about 10-15m from where the accident occured. airbags delpoyed, so fast i had no idea they had come out until i pulled over as only the passenger side airbag(from inside the side of the seat through the leather) and the passenger curtain airbag (Dropped down from above the window) deployed as is was a side impact..

i have the highest praise for the safety features in the V35 and we should all feel very safe driving these..

there were cars parked all down the road and i wouldnt be supprised that if the car didnt have some of these features i verywell could have wound up in a car on the otherside of the road..

now as for repairs.. :)

repair costis $10,700

all parts inc panels, new seat cover for the entire passengerside backrest, and new roof lining etc.

i only just got the car into the repairshop on the 26th of jan and the accident happened on the 14th of dec.. this was because we had the wait for parts.. still all the parts havent arrived and its currently the 13th of feb. they told me i shoud be able to get the car back around the 20th of feb but im not crossing my fingures.. so thats about 2 and a half months in repairs.. so i dont recommend smashing up your V :P

dont get me wrong i knew repairs would take a while etc as we all do.. but jus some food for thought.. and YES im going to keep the V once repaired and continue modifying it and YES the car is comprehensivly insured and was the other drivers fault so no cost for me!!

cheers i'll shut up now :)

kari

P.s. sorry i had some photos but i jumped in the pool the oterh week with my phone in my pocket so now i dont have them anymore :D

Hi Kari,

this is a fantastic story, and very well detailed....

Thankyou for sharing this info with us, and am glad that you are ok.

Also glad to see your great praise for our V cars, involving the accident aspect.

Please feel free to give us any more info you might have, including repair quality, any other issues, and what the reaction of the f*****g c*** who blindly turned in front of you was. (after the hit)...how old was he/she...what were they driving.

Geeesh..I am a sticky nose!

Cheers!

haha, I didn't realize that NS was Nearly Skyline hahaha..... I probably should have realized though.

I'm pretty sure airbags are very expensive on their own, do you know the total amount it's gonna cost to replace the airbags on your car?

For some reason, I have this feeling that the person driving the car that hit you was driving a mid 00's model Holden Commodore....I dunno why though LOL :) Just a random guess.

nah was like a 97 camry..he was like a 60 yr old bloke jus come out of church!! not sure of the cost of the airbags.. but they said the seat cover was one of the more expensive things costing around $1400-$1700 from memory..

as for the reaction of the bloke, he was like "whats sort of car is that?", i proceeded to tel him getting the reponse "is that an import or somthing? does that mean it will be hard to get parts", to which i simply replied "yep....".

cant comment on repiar quality as of yet but will let you guys know when i do...

kari

found a photo on my girlfriends phone!! sorry about the blurryness.. looks like i lost the photo's of the deployed airbags tho :rolleyes:

post-52521-1234570553_thumb.jpg

Edited by t0rpy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of an update to this one. Having some issues on the dyno that held us back (boost spiking) and I want to pass some info over you guys and see what you think is wrong with my setup. The current readout on this dyno is 462rwkw on a low reading dyno so keep in mind it is a real world 500rwkw setup on a hub dyno. Don't read into the power figure too much as a sign of the issue. The short and curly of it is: 2.8 Litre Racepace build RB25 NEO N/A Head with VCT (internally standard however ) Borgwarner EFR 8474  Turbosmart 50mm Straight Gate + Mac valve 6Boost Manifold 4" dump to full 4" exhaust (nil restrictions) Wastegate plumbed back in and all angles in the exhaust system are acceptable and not too sharp. GFB SV52 BOV in cooler piping  Turbosmart BOV in EFR Housing   The issue we are having is it comes onto full boost for example at 4000rpm and spikes to 24/25psi, before dropping down to 17psi before slowly rising back up to the target boost of 23psi. It was extremely uncontrollable and the tuner actually had to ramp in boost progrssively with each 1000rpm on each boost setting we selected to try and reduce the amount of spiking. Sometimes we would see a drop of 10psi from the peak at the beginning of the run, to the low, until it took the next 500-1000rpm to stabilise back up to the target boost. The tuner is pretty confident that the straight gate is just a poorly designed product and leaks too much boost upon cracking the gate open and theres no way to fix it other than going to a poppet valve. He's also confient theres no ignition breakdown or floating valves. The fueling is extremely stable as well. Turbo speed is somewhere around the 109,000rpm area. The spanner in the works for me is that prior to this Borgwarner and StraightGate, the car was tuned on -5 twins at a diferent tuner, and he also had issues controlling the boost with it spiking around the same rpm range, so to me this sounds like the same issue and it can't be anything on the turbo side as this was all changed and I think the behaviour is extremely similar, if not the same. We also removed the mac valve and did a run on wastegate pressure and it still spiked and had the same behaviour. My thoughts on possibilities are: Boost Leak VCT Cam Gear isn't reliably activating consistently - (On this however, we did a run with the VCT disabled and the boost still spiked) Turbosmart BOV is not handling the boost? However this seems unlikely to not be able to handle 20psi. I have a couple of logs that I can't make sense of if anybody knows how to read them and can obtain further logs of other parameters if they are not enough, happy to pay for anyones time. The dyno readout with the power figure is the most recent last week. The other picture is from two weeks prior to that where we couldn't break 400kw (we removed the cat), however the issue of the boost control persisted. @Lithium @Piggaz @burn4005 @GTSBoy @discopotato03 I've tagged those that were quite active in recent pages here, no disrespect to those that know turbos well but I missed tagging. Cheers 
    • I recently purchased a 2018 Infiniti Q60, which has an SD card navigation map. I can see my system has options for real time traffic updates etc, and am wondering if there is something I can purchase to get this working? I can see there are at least updated maps for USA and Canada, but nothing for Australia. Surely Infiniti took changing road systems and city expansions into account when they decided to use an inbuilt navigation over Android Auto/Apple Car Play, or are we doomed to drive on streets that don't exist in the navigation system if you drive to a new area?
    • Luckily I didn't put in etch primer as I just found out it's not compatible with my body filler lol. Also just need to sand the panel anywhere between 150-400 grit so I'm in the clear there. It does say to not apply to soft old paint, I assume that means paint that is flaking, peeling,etc
    • @dbm7 and @GTSBoy thank you both very much! will give that a shot!
×
×
  • Create New...