Jump to content
SAU Community

Recommended Posts

Hey Fellas,

I just bought some Tomei Poncams off a SAU member and arrived in the mail today

but when i opened up the package, the both cams had a lobe that was chipped! but no bits were found in the package!

Will these need to be rebuilt or are they going into the bin?

Here is a picture of one of the Poncams! sorry for bad quality, i've only got a phone camera

Please let me know! :) i feel jibbed!

Link to comment
https://www.sau.com.au/forums/topic/254365-tomei-poncams-lobes-chipped/
Share on other sites

this may sound dumb but make sure they werent taken off for balancing before you go adding more metal to it (although it does look like a strange place to be taking off metal). ask the seller about it.

  • Like 1

They are made from chilled cast iron, so you are limited as to what you can do. If they were mine, and the budget precluded buying some more, then I'd take a very fine engineers stone and VERY CAREFULLY dress the edges of the fractures to make sure no rough edges can gouge the buckets. There should be no sign of more material being removed by the stone, just makes sure the very edges are dressed. They should, unless cracked invisibly, run OK like that. I have run worse when a replacement hasn't been available and a race engine had to get out there at short notice. When you renew them, if you run them as is, change the buckets on the the 2 damaged lobes. It's a shame they are chipped on a load bearing part of the lobes, you have lost maybe a 1/7 th of the lobe width, which puts the load up by that amount on both bucket and lobe, but it's an OHC engine and being Poncams run stock (soft) springs, so the loads are not great anyway. Good luck....

if you expected to get a set of undamaged cams it's unacceptable. take this up with the seller.
yeh i would be worried about using those , they will work but for how long? risky, i would be taking it up with the seller they obviously know they were chipped unless theyre blind!!
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...