Jump to content
SAU Community

Recommended Posts

hey so im looking at buying my first skyline.

as soon as i sell my current ride (2004 holden commodore 's' pack) ill be lookin to purchase a r33 gts-t manual

ive searched thru carsguide/carsales/drive ect, and there arent many around in w.a, also the ones that are here look more expensive then what i find from over east.

any good yards you guys could recomend for me to have a look at?

would it be worth buying from over east?

Link to comment
https://www.sau.com.au/forums/topic/254552-where-to-get-an-r33/
Share on other sites

aha wow ok, autotrader (which was redirected to tradingpost) has alot more search results then the other sites ive tried.

the website didnt come up in my google search, hence the reason i havent checked it.

thanks :yes:

Make sure to get a series 2 in UBER RARE SILVER!!11TY!

But there are a few import places in wangara, dc imports is 2 minutes down the road from autoworx as well if you cant find anything from them, but just remember dont buy the first thing you get into, look around :P

Be patient, keep searching these forums and all trading posts.

Look for a car that has been rebuilt with lots of goodies some poor bastard wasted all there money on. Don't bother with a stock example, you'll end up being that poor bastard too.

Make sure the car is tested for compression/leakdown blah blah blah, find out where it was rebuilt etc. Look for one with good interior and body.

You will find the re sale value of the 33's is less over in the eastern states that is why there cheaper.

Good luck.

Look for a car that has been rebuilt with lots of goodies some poor bastard wasted all there money on. Don't bother with a stock example, you'll end up being that poor bastard too.

That would depend on what he wants out of the car tho. If he is anything like me a stock example would be better. If you want to build it ur self and make it truely your car then stock is the only way to go.

If you dont mind driving someone elses work then by all means go for a worked r33. =)

i agree buying a worked example is better then a stocker

will save you thousands in the end

i mean all mods are very similar in the train of thought

more boost rebuild more boost and more boost

if spending 2x as much money is truely your car then i hope you have deep pockets

That would depend on what he wants out of the car tho. If he is anything like me a stock example would be better. If you want to build it ur self and make it truely your car then stock is the only way to go.

If you dont mind driving someone elses work then by all means go for a worked r33. =)

What evr car anyone drives its always going to be someone elses work.

If you want to make it your own, change the appearance its not as costly as performance mods.

I went down that road i purchased a stock example and i made it my own appearance and performance. Would i do it that way again? No way

What evr car anyone drives its always going to be someone elses work.

If you want to make it your own, change the appearance its not as costly as performance mods.

I went down that road i purchased a stock example and i made it my own appearance and performance. Would i do it that way again? No way

What do you mean its always going to be someones elses work?

Ive yet to send my car to a workshop (apart from wheel alignments and the proffesional alarm install).

All my mods have been done in house. Although It does help my dad is a car nut and i have access to all the tools i need to get things done.

This ranges from installing intercoolers, radiators, exhaust systems to gauges to painting and fitting a body kit and not to mention maintaence work...

Like its been said above it all comes down to whether its your hobby or not. I enjoy working on my car and thats why i chose to get a relatively stock r33 over a worked one. I wanted to do the work... and if you can do it ur self its not that expensive. You just got to becareful what you buy and when you buy it.

I do agree if you do not wish to do the work or simply dont have access to the tools then a worked example will be the choice for you.

Edited by br3ndan

Its someone elses work cause someone else manufactured the vechicle ie nissan. Just being smart there :blink:

If he is like you and he wants to do the work himself then yes buying a stock one would be best but defintely not cost effective.

Its someone elses work cause someone else manufactured the vechicle ie nissan. Just being smart there :blink:

If he is like you and he wants to do the work himself then yes buying a stock one would be best but defintely not cost effective.

haha... agreed ;)

nows its just down to finding the actual car

well ultimately it depends on how much i get for my current car.

but 13/15k is my range

spoke to guys at autoworx, they have no r33's atm as the costs for them are to high atm (exchange rates), but they may have 1 on the way.

ill check out down under auto's this week.

wangara is near by for me.

id prefer stock, even tho itl cost more in the long run, id just like the satisfaction of buying and geting it all done myself:)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...