Jump to content
SAU Community

Recommended Posts

hey so im looking at buying my first skyline.

as soon as i sell my current ride (2004 holden commodore 's' pack) ill be lookin to purchase a r33 gts-t manual

ive searched thru carsguide/carsales/drive ect, and there arent many around in w.a, also the ones that are here look more expensive then what i find from over east.

any good yards you guys could recomend for me to have a look at?

would it be worth buying from over east?

Link to comment
https://www.sau.com.au/forums/topic/254552-where-to-get-an-r33/
Share on other sites

aha wow ok, autotrader (which was redirected to tradingpost) has alot more search results then the other sites ive tried.

the website didnt come up in my google search, hence the reason i havent checked it.

thanks :yes:

Make sure to get a series 2 in UBER RARE SILVER!!11TY!

But there are a few import places in wangara, dc imports is 2 minutes down the road from autoworx as well if you cant find anything from them, but just remember dont buy the first thing you get into, look around :P

Be patient, keep searching these forums and all trading posts.

Look for a car that has been rebuilt with lots of goodies some poor bastard wasted all there money on. Don't bother with a stock example, you'll end up being that poor bastard too.

Make sure the car is tested for compression/leakdown blah blah blah, find out where it was rebuilt etc. Look for one with good interior and body.

You will find the re sale value of the 33's is less over in the eastern states that is why there cheaper.

Good luck.

Look for a car that has been rebuilt with lots of goodies some poor bastard wasted all there money on. Don't bother with a stock example, you'll end up being that poor bastard too.

That would depend on what he wants out of the car tho. If he is anything like me a stock example would be better. If you want to build it ur self and make it truely your car then stock is the only way to go.

If you dont mind driving someone elses work then by all means go for a worked r33. =)

i agree buying a worked example is better then a stocker

will save you thousands in the end

i mean all mods are very similar in the train of thought

more boost rebuild more boost and more boost

if spending 2x as much money is truely your car then i hope you have deep pockets

That would depend on what he wants out of the car tho. If he is anything like me a stock example would be better. If you want to build it ur self and make it truely your car then stock is the only way to go.

If you dont mind driving someone elses work then by all means go for a worked r33. =)

What evr car anyone drives its always going to be someone elses work.

If you want to make it your own, change the appearance its not as costly as performance mods.

I went down that road i purchased a stock example and i made it my own appearance and performance. Would i do it that way again? No way

What evr car anyone drives its always going to be someone elses work.

If you want to make it your own, change the appearance its not as costly as performance mods.

I went down that road i purchased a stock example and i made it my own appearance and performance. Would i do it that way again? No way

What do you mean its always going to be someones elses work?

Ive yet to send my car to a workshop (apart from wheel alignments and the proffesional alarm install).

All my mods have been done in house. Although It does help my dad is a car nut and i have access to all the tools i need to get things done.

This ranges from installing intercoolers, radiators, exhaust systems to gauges to painting and fitting a body kit and not to mention maintaence work...

Like its been said above it all comes down to whether its your hobby or not. I enjoy working on my car and thats why i chose to get a relatively stock r33 over a worked one. I wanted to do the work... and if you can do it ur self its not that expensive. You just got to becareful what you buy and when you buy it.

I do agree if you do not wish to do the work or simply dont have access to the tools then a worked example will be the choice for you.

Edited by br3ndan

Its someone elses work cause someone else manufactured the vechicle ie nissan. Just being smart there :blink:

If he is like you and he wants to do the work himself then yes buying a stock one would be best but defintely not cost effective.

Its someone elses work cause someone else manufactured the vechicle ie nissan. Just being smart there :blink:

If he is like you and he wants to do the work himself then yes buying a stock one would be best but defintely not cost effective.

haha... agreed ;)

nows its just down to finding the actual car

well ultimately it depends on how much i get for my current car.

but 13/15k is my range

spoke to guys at autoworx, they have no r33's atm as the costs for them are to high atm (exchange rates), but they may have 1 on the way.

ill check out down under auto's this week.

wangara is near by for me.

id prefer stock, even tho itl cost more in the long run, id just like the satisfaction of buying and geting it all done myself:)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...