Jump to content
SAU Community

Recommended Posts

I have for sale some Bridgestone RE55 Semi Slicks, these tyres are brand new, never fitted or used. I have two sizes available 225/50/16 and also 265/35/18. Can call me direct on 0430 494 018 or simply PM for further details or to come have a look etc. Thanks

Sorry...16" - $200each firm & 18" - $350 each firm. Thanks again.

Edited by mixd
Link to comment
https://www.sau.com.au/forums/topic/254603-tyres-bridgestone-re55-semi-slicks/
Share on other sites

It might be best to PM me or message my above phone number for direct questions like "will they fit such and such". But to answer generally...I am in Melbourne,(Alphington/Kew area). 265/35/18 will fit on 9.5" rims perfectly I really don't recommend running 265/35's on 8.5" rims...not in semi slicks. Yes will sell pairs, I have a few sets of each so will sell in matched pairs, left and rights. Cheers

I am calling and calling.

These are street legal yes?

I have 4 x 265/35/18 RE01R's at the moment and the front 2 are up for replacing, will it be okay to replace with the 55's?

If so, how much for 2 posted to WA?

If not, can you let me know full set of 4 to WA

I am calling and calling.

These are street legal yes?

I have 4 x 265/35/18 RE01R's at the moment and the front 2 are up for replacing, will it be okay to replace with the 55's?

If so, how much for 2 posted to WA?

If not, can you let me know full set of 4 to WA

Yes treadwear indicators and load/speed rating = street legal...very sticky and soft...but street legal.

ive been trying to call on several occasions today, and just recently about 2 mins ago. yet no one seems to answer that number provided. If you are seriously keen to sell, at least answer the damn phone.

also called about 5 times today. keen on 4 X 16" shipped to Sydney.

As per above post...perhaps PM me is best...no stress guys, I have more than one set of each available. Simply leave a PM and I will reply when I(more than once a day) check back into to this forum. Cheers

actually can that, I just scored 4 x RE01R's (last 4 in the country apparently) for $1500 fitted, I am over the friggin moon

Hilarious. I also got the 'last 4', also for $1,600.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...