Jump to content
SAU Community

Recommended Posts

Do you have any other 22" to compare too?

im in the market for a 22" myself and there is SO much to choose from its probably the hardest thing ive had to decide on

I know how you feel with the monitor choices.

After a lot of research and this thread on whirlpool convinced me the Benq E2200HD was the choice, but the best part it was only $233 at MSY (3-4 weeks ago)

30 pages!!!!!

http://forums.whirlpool.net.au/forum-replies.cfm?t=1106845

this at full naive resolution 1950x1080 and can still read text fine

post-36493-1234854015_thumb.jpg

Hmm..22" monitors were a choice for me when I went to looking for my PC

I ended up getting a ASUS VW222U. It's max res is only 1680x1050 (thus making a 16:10 screen layout) but the colours are excellent. You get a little bit of light leakage at the top and bottom of the screen...it's only seen in black screens.

The BenQ screen is very nice - onboard HDMI port full 1080p res - As I mentioned earlier, I got this for my friends PC, the only thing I have to do is adjust the settings to make it full screen at 1080p (currently there is a big black border around) - Peter how did you get it at full screen (i didn't have any time to adjust the settings)

I know how you feel with the monitor choices.

After a lot of research and this thread on whirlpool convinced me the Benq E2200HD was the choice, but the best part it was only $233 at MSY (3-4 weeks ago)

30 pages!!!!!

http://forums.whirlpool.net.au/forum-replies.cfm?t=1106845

this at full naive resolution 1950x1080 and can still read text fine

This one dude???

21.5" it says on thier jibwah :)

21.5 “ 2ms HD WS Benq E2200HD Full HD “NSW,QLD,SA,WA” $238

Hmm..22" monitors were a choice for me when I went to looking for my PC

I ended up getting a ASUS VW222U. It's max res is only 1680x1050 (thus making a 16:10 screen layout) but the colours are excellent. You get a little bit of light leakage at the top and bottom of the screen...it's only seen in black screens.

The BenQ screen is very nice - onboard HDMI port full 1080p res - As I mentioned earlier, I got this for my friends PC, the only thing I have to do is adjust the settings to make it full screen at 1080p (currently there is a big black border around) - Peter how did you get it at full screen (i didn't have any time to adjust the settings)

When i first got mind it had bleeding too, but i have really taken notice of it since.

I came from a dieing 19in CRT and was very impressed

I adjusted the resolution using the my GPUs ATI software.

R31Nismoid - yep, that's the one, come on .5in........ :D

I have an Asus MK241H (24inch) 1920x1200, 2ms, built in mic/webcam and HDMI input for my ps3, I love it. Tho it did cost a bit, I can't fault it.

Most of the rest of my PC is Asus.

Scorpion tech computers in Melbourne have competitive prices aswell.

Oh and Antec 900 case is cool too.

The Scorp Tech PC's when a mate was pricing them up, i could build easily for a good 30% saving :blush:

On setup i could have saved over 1.5k :D

They are like most systems really, if you cant build your own, you pay a fairly reasonable premium

I just started building a new PC - got the Antec Nine Hundred - its hot! added two extra 120mm antec tri-cool fans with blue lights and got a purple neon stick coming in on monday... the rest of the computer will be fairly straight forward - Quad Core, 4GB DDR2 1066, 9800GTX...

Biggest pain is deciding on a monitor - got to pick something that I'm not going to be iffy on since I'll be staring at the thing for the next few years or so.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...