Jump to content
SAU Community

Recommended Posts

Hey guys,

Here's the issue; On low load and cruise the turbos shuffle quite audibly on my car.

Here's the specs;

-RB30 bottom end (full forged)

-RB26 head, mild porting

-Tomei 270IN and EX cams 10.25mm lift

-Adj cam gears set to zero

-Hard pipe kit

-Stock BOV's

-Stock manifolds port matched

-Tomei dumps

-HKS front pipes

-HKS GT-RS's

-ARC airbox (the twin entry one)

-AFM's intact but not connected (ECU doesnt need them)

-OEM plenum

-OEM throttle bodies

So, a balance pipe has been suggested, but before spending another $1000 on the car, id like to hear first hand experiences from people who have fixed this issue :D

Link to comment
https://www.sau.com.au/forums/topic/255494-hks-gt-rss-shuffle/
Share on other sites

Hey guys,

Here's the issue; On low load and cruise the turbos shuffle quite audibly on my car.

Here's the specs;

-RB30 bottom end (full forged)

-RB26 head, mild porting

-Tomei 270IN and EX cams 10.25mm lift

-Adj cam gears set to zero

-Hard pipe kit

-Stock BOV's

-Stock manifolds port matched

-Tomei dumps

-HKS front pipes

-HKS GT-RS's

-ARC airbox (the twin entry one)

-AFM's intact but not connected (ECU doesnt need them)

-OEM plenum

-OEM throttle bodies

So, a balance pipe has been suggested, but before spending another $1000 on the car, id like to hear first hand experiences from people who have fixed this issue :D

Join the inlets and exhaust mainfolds together....fixed.

or...drive the car with WOT...fixed

Edited by DiRTgarage

Buy a bumbag and embrace the flutters!!

How long is it between shuffles? and how audible? the crossover pipe is the obvious answer but you can lower the volume a few different ways if you cbf with the pipe...

I have done back to back testing with this shiz...joining the pipes kills the shuffle...instantly.

but it softens the turbo's up a little too.

not in all cases, i have the HKS balance pipes and i still get a very slight shuffle, but it has improved it quite alot but yeh not totaly fixed

Edited by UWISSH!
yes they are

car was tuned by jim at crd

wow...mine was perfect after the exhaust manifold balance pipes and CRD tune...i wonder whats different in your set-up to mine?

donkey...HKS make the manifolds...very expensive due to the fact they are highly sought after and now dis-continued. I recently saw a set on GTR UK and they wanted 1000GBP for them which is 2000AUD. I recommend a tune due to the fact the spool rates are slightly different and the engine maybe using different load cells from the map after the change is made.

Edited by DiRTgarage

hahahah stevo. single ftw :P

oh, pitty you have the stock manifolds. making a balance pipe could be a drama. a single butterfly inlet manifold would help alot. (more vacume to keep the bovs open...)

my 2c

ps.. you should try 2510 turbos.. uber shuffle.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I believe @Duncan has given it a crack at Mt Buller before (in actual race conditions)
    • All my Polish car culture insight comes from watching Nightride. So I half expect this to get 1UZ swapped eventually?! Are you going to drive it in winter? I'm always curious how ATTESA would hold up in the snow. There isn't that much opportunity to try it in Australia.  
    • My steering lock unit on my Infiniti G37 has failed. The car is a local 2012 Infiniti G37 (Q60 ) I need to replace the unit My local mechanic said i need to buy a complete steering wheel assembly. Does anybody no any mechanics in Gold Coast or Brisbane who can fix this issue or where i can buy just the Steering lock control unit. Thanks
    • thanks, will conduct myself accordingly. i unfortunately put about 150 miles on the car before reading this thread again, however no PS issues, and definitely no turbo issues. it spools normally and still feels fast to me, probably because my previous car was an N/A auto sedan...gonna go fix the PS vacuum line though lol. safe to say, got what i came to this thread for. thanks  
    • Agreed, I've never seen a 260RS specific manual. As GTSBoy said it will mostly be stagea other than the engine loom https://www.hgeconsulting.com.au/stageaservicemanual.pdf
×
×
  • Create New...