Jump to content
SAU Community

Recommended Posts

  • Replies 71
  • Created
  • Last Reply

Top Posters In This Topic

not all defects need roadworthys you can get defected and only have to get it cleared at vic roads it all depends on what the cop puts on the form i got defected but didnt need a roadworthy all i had to do was get it cleared at vicroads. it all depends what the cops say and they put on the defect form.

Link to comment
https://www.sau.com.au/forums/topic/255886-defected/page/4/#findComment-4417879
Share on other sites

You definitely have a S1.5, which requires an airbag wheel.

My mate removed his airbag globe from his dash when he had to get a roadworthy, as the light was always on, and failed inspection as the airbag light did not come on when the inspector turned the key. Mind you he still had the std airbag wheel fitted, so if you where to fit a non-airbag wheel it would probably pass as the inspector may be non-the-wiser.

Link to comment
https://www.sau.com.au/forums/topic/255886-defected/page/4/#findComment-4418157
Share on other sites

is that wire the only loose wire in the steering column,

was it connected to anything before with the old steering wheel.

the airbag light problem could've came up when you remove the old steering wheel if the previuos owner put a resistor in the Airbag plug but it got knocked or pulled out when you removed your old steering wheel.

hope that makes sense :D

Link to comment
https://www.sau.com.au/forums/topic/255886-defected/page/4/#findComment-4418366
Share on other sites

His car is in the mechanics now getting a proper wheel put on... IN THE PROCESS OF DOING THIS.. the shop had something of interest we liked... thought wed take some pictures and show you peeps.. what do you guys think..? :D:P:(:P:P

post-45807-1234248967_thumb.jpg

post-45807-1234249003_thumb.jpg

post-45807-1234249090_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/255886-defected/page/4/#findComment-4418480
Share on other sites

Just wondering, only just read me defect notice tonight, if im reading correctly you have 7 days to drive the car, after those 7 days you can only drive the car for another 21 days to have it tested or repaired AFTER the defects have been fixed, after that time the rego is suspended, is that right?

I have attached a front and back copy of my defect, the bits im referring are the first instructional bit on the back which refers to section 4 on the front but section 7 says that i have up untill the 4th of march before the rego is suspended.

post-27276-1234346358_thumb.jpg

post-27276-1234346388_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/255886-defected/page/4/#findComment-4420919
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nah, don't bother doing any actual measurements on the car. Just go ask the inter-f**king-net.
    • I currently have 18 x 9 +30 on the front with 18 x 10.5 +38 on the rear. Absolutely regretted it. Ended up putting 15 mm spacers on front and 25 mm spacers on the rear. Not to mention the rears were like a mm from hitting the coilovers. Definitely would go more aggressive then what you were originally planning. Keep in mind my guards are rolled and cars fair low so you might possibly need to roll guards depending how aggressive you go and how low the car is. Im not an expert but the 18 x 8.5 +25 18x9.5 +30 Sounds like it would sit much better.
    • Hey guys, sorry i have been researching for a few months and absolutely cannot wrap my head around this. I am about to order some rims to fit my R34 Gtt with coilovers My original plan was to order Rota grid R in 18x8.5 +30 235 40 R18 Fronts 18x9.5 +35 255 35 r18 rears But then the thought in my head said this isnt aggressive enough. I want the most concave spokes i can get without too much of poke and scrubbing   So my thoughts now is  18x8.5 +25 18x9.5 +30   My question is will this be the most aggressive i could get it without any guard rolling and does the type of rim style affect the offset / size.   Thanks everyone.
    • Lower parts are there. On passenger seat, bright yellow bit is the release mount. On drivers, bright yellow bit is the lower buckle for the other side. My bet is lowers are tucked out of the way as much as possible for visuals.
    • I'm guessing its a 4 point harness, 3 of the 4 belts are visible. I'm guessing the hidden belt is tucked down between the seat and door. 
×
×
  • Create New...