Jump to content
SAU Community

Recommended Posts

i spoke to just jap today, they said they had a bad batch a while ago, now they think i have a 300zx one instead by accident, i need my car this week end so i cut mine in half, grinded it to make it the correct shape, turned down the brass spacer/washer and welded it back together in the correct spot, gonna test it all out tonight,

i also noticed the lock bar is shorter than the original steering rack and when i tried to get the toe correct by eye i only have 3 threads left, no way im gonna drive it like that, so i pulled it all back apart and have made some 14mm spacers where the inner tie rods screw into the lock bar, this should give me a safe thread engagement now and get the toe correct safely,

just jap are sending me a different bypass on monday so when i recieve it i will let you guys know if it fits

  • 1 year later...

sooo, anyone get to the bottom of this, i wanna do this shortly

bypass kit http://justjap.com/s...184&cat=&page=1

BTW: does the R34 NEO powersteering pump with single outlet work as a replacement (along with bracket)?

Edited by BWRGTR

If you're talking about putting a Neo pump onto an R32 engine.....no. The hoses are completely different. It's an Enzed/Pirtek job and whatever $$ is costs you to buy the other half of the hoses if you don't have both already. I had to do it to put the Neo into my R32.

More to the point. If you're putting a single stage PS pump in, then you do not need to loop the HICAS lines. Just pull all teh HICAS stuff out and throw it in the bin. That's the rear solenoid, the engine bay solenoids, and some of the pipework. You just keep the stuff that goes from the pump to the rack and reservoir, and find a way to plumb a cooling loop/cooler in place.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
×
×
  • Create New...