Jump to content
SAU Community

Why don't you lot talk?

Napalm

By Napalm,
in Tasmania

 Share

Recommended Posts

floody Experienced

floody

Posted
Posted

Maybe we're more likely to be out driving on our wicked roads, as opposed to trash talking each tohers cars/endlessly chuntering on about our ub3r l33t dr1f7 sk333lz, like a lot of other states ?

cheers,

floody

  • 2 weeks later...
harolto Explorer

harolto

Posted
Posted

doesnt have much to do with not being online:P

but on friday i saw a red GTS skyline it was heaps nice and an older woman was driving it about 40-50 , this was at the new eastlands roundabout, it was a heaps nice car:D

-Jake-

PS i went to Baskerville this weekend and got upto 150 km/h on the straight but i only got 3laps in cause subaru booked the track so i only had 10mins:( oh well, hopefully next time i will go harder:D and bring a stop watch:P

PHaT MR30 Grand Master

PHaT MR30

Posted
Posted

Hey well on the 1st & 2nd November a huge group of us are comming down to hobart for a cruise, mainly for the TASASCA sound off at the casino and to get smashed and stuff.

If i am not mistaken there will be a large group of 'Riced' cars, and a few imports, them being largely R33 GTSt, Soarer, 180sx, AE86?, hopefully i will have my RB25 Silvia ready and regoed cos its gonna be one hellava cruise (for tassie anyway)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • BASHERnissan
      TPS voltage RB25DET

      By BASHERnissan · Posted

      Hi guys my TPS voltage is reading over 2v at idle.  My Haltech ECU is reading around 40% throttle position at idle also which is really strange. Note the actual throttle position sensor is brand new…    anyone have any experience with this or know how to calibrate it on Haltech ? 
    • joshuaho96
      Cas issue

      By joshuaho96 · Posted

      The OEM disk will not work on any AEM ECU, you need to use the one they made. You shouldn't have to flip the CAS or whatever you were describing, if you set the ignition sync offset correctly it can't backfire. Make sure you're using a spark plug lead on coil 1 instead of the timing loop to avoid weird issues with the timing light. Double check that your timing settings are actually correct, like is the 24 tooth configured correct or should it actually be 12 teeth for 1 crank revolution? I also found this: 305817248-AEM-Undocumented-Settings-v1-2.pdf    
    • Dose Pipe Sutututu
      M35 Aftermarket Fuel Pump

      By Dose Pipe Sutututu · Posted

      Yeah, I don't believe the M35 uses a deadhead system.
    • GTSBoy
      M35 Aftermarket Fuel Pump

      By GTSBoy · Posted

      Have you done your thinking backwards? 3 bar, 43.5 psi pressure drop being the presumed specification for an injector, means you need 3 bar upstream when they are firing into atmospheric pressure, and more upstream pressure than that when on boost (you add your boost to your rail pressure to maintain 3 bar across the injector) and you need..... less pressure upstream when you have vacuum in the manifold. So, presuming that you're idling at -10 psi, then you only need ~23 psi in the rail. I realise that I did not need to say all of that to you specifically Matt, once you'd realised your mistake. It's mostly there for complete clarity for others.
    • Dose Pipe Sutututu
      RB25 Drama's

      By Dose Pipe Sutututu · Posted

      Have you reached out to the guys at Spool Imports? They are a Ross dealer, I can imagine they would have the rings just sitting on the shelf (I could be wrong).  
×
×
  • Create New...