Jump to content
SAU Community

Recommended Posts

This is a revised version of an older post - sold stuff has been removed, some more stuff added.

SORRY NO PICS AT THE MOMENT - HOPE TO GET AROUND TO THAT SOON.

Engine parts:

R33 RB26 Block

Will require tunnel bore (cradle came off other block)

86mm bore

$300

R33 RB26 Block

ADVAN PREPED

OIL FEED RE-ENFORCED

87mm Bore

$500

R33 RB26 Block - 05U

Super Low K's

Freshly Bored to 87mm

$600

RB26 Standard Rods

Good Condition

Ideal Upgrade for RB25 apparently?

$200 set

RB26 Standard Rods

With ARP Bolts

$250 set

CP Pistons for RB26

87mm

10000k's old

Complete with pins / clips etc

$500 set

Adjustable Cam Gears

Suit RB20 / RB26

Inlet and Exhaust

$150 pair

Adjustable cam gears

(exhaust just cnc slotted)

$120 pair

Stock Cam Gears

RB26

$50 pair

RB26 Sump With Diff

Came off R33 (suits R32 as well)

$400

TURBOS

Mines Spec Turbos

Varient of Nismo / Group A turbo

Modified wastegates and actuators

responsive and powerful turbo.

fully rebuilt - like new

$2200 set

Rebuilt R33 GTR Turbos

New Bearings and Seals

N1 Exhaust Turbine

360 thrust bearings

Never Used

$1450 pair

Apexi ISAMU Twin High Mount Kit

Twin RX6 Apexi Turbos, Manifolds, wastegate and piping

700 ~ 800 hp

Still on car

POA or OFFERS

Suspension parts:

Cusco Pillowball Tops

Suit BNR32

Suit many types of suspension

rears may need new bearings (still useable)

$200 set

HKS Springs

Suit BNR32

Uprage Spring Rate over Stock Springs

$200 set

Cusco F Upper Control Arms

Suit BNR32

Allow more neg than stock arms / good upgrade for worn stock arms

Just had all new bearings

$250 pair

ELECTRONICS

Nismo AFM's x 2

Suit ALL RB26's

Good Condition - Just Bench tested and Claibrated

$650 pair or $550 swap with your stock AFM's

Z32 80mm AFM's x 2

Includes Plugs

$550 pair or $450 swap with your stock AFM's

Japaneses Chip for R32 GTR ECU

Fujitsaki SPL (?)

Chip Only

Have used this chip and it works well on our fuel and 18psi

$80

IMPUL ECU

Suit R32 and R33 GTR

Good upgrade if you are running intake and exhaust mods

Good AFR's

$250

R32 GTR Gauges

Three Gauge Cluster from centre console

$100

Lamoo Japanese Mechanical Oil Pressure Gauge

Mechanical includes braided line

$50

WHEELS

Technomagnesio

17 x 9 +25

Just been Stripped, can powdercoat in your choice of colour

$1300 set

Rays TE37

17x8 / 17x9

GTS-T offset ( +30 ish)

Just Been Stripped, can powdercoat in your choic of colour

$2000 set

17" Tyres

255/40 hankooks (?)

70%

$150 pair

17" Tyres

255/40 Yokohama Advans

70%

$200 pair

Intake and Cooling

Stock R32 GTR Airbox

$150

Dual 140mm Apexi Power Intake Filters

Suit GTR with 80mm AFM's

Like New

$120 for the pair

Stock GTR Intercooler

$250

ARC Intercooler

Sut R32 and R33 GTR

(R34 with small mod)

$1300

EXHAUST

Stock RB26 Dump Pipes

$50 pair

Apexi Front Pipes

$250

INTERIOR

GIAS "Style" Seat

Exactly like GIAS / Low Max seat

Just doesnt say bride anywhere

$550 each (2 seats only)

Skyline / Silvia seat rails L & R

$250 pair

Momo Sport Steering Wheel

Perforated leather

Comes with horn button and ring

OK Condition

$80

SORRY NO PICS AT THE MOMENT - HOPE TO GET AROUND TO THAT SOON.

Open to offers on some stuff - other stuff I 'm not

No lowballers please. Available for pickup in melbourne or will ship at buyers expense.

PM or email me [email protected]

Thanks for looking!

Edited by Antimatter
  • 2 weeks later...

gday mate, the:

Rebuilt R33 GTR Turbos

New Bearings and Seals

N1 Exhaust Turbine

360 thrust bearings

Never Used

$1450 pair

would put out the same level of boost and power as r34 n1's/ 2860-7's right?

  • 4 months later...

Interested in the AFMs: are these Z32 type? Please pm, as I rarely browse the sale sections.

Cheers,

Micah

Apexi ISAMU Twin High Mount Kit

Twin RX6 Apexi Turbos, Manifolds, wastegate and piping

700 ~ 800 hp

Still on car

POA or OFFERS

How much

Apexi ISAMU Twin High Mount Kit

Twin RX6 Apexi Turbos, Manifolds, wastegate and piping

700 ~ 800 hp

Still on car

POA or OFFERS

How much

4k or nearest offer. have an interest pending at the moment

Apexi ISAMU Twin High Mount Kit

Twin RX6 Apexi Turbos, Manifolds, wastegate and piping

700 ~ 800 hp

Still on car

POA or OFFERS

How much

  • 6 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
×
×
  • Create New...