Jump to content
SAU Community

Recommended Posts

guys and girls the next official awd-turbo cruise is set

date: 15th march

first meet: BP Coomera meet 8.15am leave 8.30am sharp

second meet: Shell Nundgee meet 9.15am leave 9.30am sharp

final meet: BP Morayfield 10.00am leave 10.30am sharp

this will be a great day with the route taking in nearly 250km of twisty mountain roads and sweepers

there will be a BBQ lunch and drinks available on the day

due to the turn out at previous events we will have 3 cars that know the route, 1 leader, 1 in the middle of the group and 1 at the tail end.

hope to see you all there

for anyone who hasnt attended one of these previously they are a great day with some very challenging driving and some great roads

you will have a great day

post up if your keen

Link to comment
https://www.sau.com.au/forums/topic/257459-awd-turbo-cruise-15th-march/
Share on other sites

nah mate, its open to all that wish to enjoy a great day cruising and meeting people..

the forum is awd-turbo, but there are a few members that are without awd cars..

awd is the theme trying to be kept though.. or atleast a passion for them

a bit like highrollers trying to keep 400hp cars only on their forums but allowing smaller people to cruise?

plus i heard there is A LOT of politics on this forum, specially between mods.

i guess you could say a bit like high rollers..

all cars and new members will be welcomed.. just have a look at the intro thread on the forum..

as for the polotics between mods, i am a mod on there and its only a new forum so its taken a bit to get it right but alls good now :wave: ..

as for the polotics between mods, i am a mod on there and its only a new forum so its taken a bit to get it right but alls good now :( ..

when u have the women mods bitchin at each other ready to rip each others hair out and a mod resigning because of personal conflicts

its not the most welcoming forum nor will it last long

specially if u keep the bitch's there and allow them to feel the need to over power people and create a small group on there and gang up against the other people on the forum.

lol

when u have the women mods bitchin at each other ready to rip each others hair out and a mod resigning because of personal conflicts

its not the most welcoming forum nor will it last long

specially if u keep the bitch's there and allow them to feel the need to over power people and create a small group on there and gang up against the other people on the forum.

lol

i here ya mate.. i dont want that shit either..

i just enjoy hangin out and cruisin with cool people, we have a bit of fun on there

and will get better, especialy if we can get more people on there like you and me..

i here ya mate.. i dont want that shit either..

i just enjoy hangin out and cruisin with cool people, we have a bit of fun on there

and will get better, especialy if we can get more people on there like you and me..

hahah a very true....

get rid of one of the girls (offtopic mod) and everything will be fine

LOL

when u have the women mods bitchin at each other ready to rip each others hair out and a mod resigning because of personal conflicts

its not the most welcoming forum nor will it last long

specially if u keep the bitch's there and allow them to feel the need to over power people and create a small group on there and gang up against the other people on the forum.

lol

hahah a very true....

get rid of one of the girls (offtopic mod) and everything will be fine

LOL

mate i am one of the owners of the site and yeah there has been some problems in the past but all sites have problems

most people on the forum are on multiple sites and when people start bringing there personal shit on to the site that is when there are problems

the mod you mentioned has even coped a bit of harrasment and abuse on site but she takes it in her stride

I know that one of the guys that I had to ban a few months back was one of her ex's and his conduct on the site was disgusting to say the least.

and the mod that resigned has left the country and gone to hong kong for 6-12 months

but enough about the politics

this will be a great day with some great driving and a wide variety of cars

Edited by evo201

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...