Jump to content
SAU Community

Long weekend at wakefield

Dominic

By Dominic,
in Events Archive

 Share

Recommended Posts

franks Veteran

franks

Posted
Posted

yo guys.

its 12:30am (just got back from a wedding) and im pumped for this morning... i hope someone has a size 17 socket so as i can take my wheels off, otherwise i'll be using some very ordinary brake pads!

as duncan repeated, meeting point will be BP/Hungry Jacks on King Georges Rd, Lakemba at 7am- allbeit i feel as though this post is too late...should be on the track by 10am.

i know of 3 other cars making it down. unsure of who else...

benm Grand Master

benm

Posted
Posted

Great day at the track yesterday. Woulda been better if their were no bikes or v8 auscars but oh well you get that on an open day I guess.

Highlights of the day for me were:

* Stock Camry with the *beep beep* down the main straight

* White R33 GTR who couldn't help going sideways (smoke or no smoke)

* Franks R34 GTT screeeeeeaming past heading for turn 1

* Franks forgetting the directions back to the Hwy :D

Looks like an interesting track, can't wait to get out there (hopefully on an SAU Private day)

benm Grand Master

benm

Posted
Posted
Originally posted by franks

yeah thanks for sticking around ben! you must've been pretty bored/frustrated!

Nah wasn't bored at all, today was just an obervation day to take in all the sights etc ready for when i give that track a good hammering towards the end of the year.

 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • iain_ST44GA
      M35 VQ25DET starter motor

      By iain_ST44GA · Posted

      Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • Murray_Calavera
      R33 GTR running -9 with no tune

      By Murray_Calavera · Posted

      I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...