Jump to content
SAU Community

Recommended Posts

Yay a cruise. I hope to make it as well!

As long as I'm not driving behind you!

The way your GTR sat, sounded and launched out of corners on the putty rd cruise makes me want to do very bad things to my mortgage.

I drove the route today and checked out stuff and things, finished the day by taking my daughter to Jenolan Caves, I recommend that to anyone, the drive along Jenolan Rd is stupid fun :P

I cheated and took the Great Western HWY home because i thought it would be quicker, bloody road works, took longer than the Bell Line :)

Agreed, just when you think your GTR looks good driving along, you see GTRsean's one on the road :P

Lol you guys are too much. 5 years of ownership will do that!

She's good from a far but far from good body wise, but mechanically though....... :).

Hope to catch up with you lot and others soon.

i should be in on this one too guys just hope ill have the younger auto box swapped by this cruise so i can not have to worry about giving it a squirt thru bells line... keep me posted mark...... and congrats on the exec positions champ...... hope to see all u guys there for this one

The way your GTR sat, sounded and launched out of corners on the putty rd cruise makes me want to do very bad things to my mortgage.

Haha, true, I ended up with a 26/30 combo in my 31 lol.

Is it NSW members only or SAU members only? Cause I'm not a member of the specific NSW group.

Edited by Silhouette-R

http://www.skylinesaustralia.com/forums/Me...ml#entry4439337

If you cant open this link you are not a SAU NSW member, if you would like to become a member fill out this form SAU NSW Membership Form

PM an Exec member if you have any questions or need help

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...