Jump to content
SAU Community

Recommended Posts

Yay a cruise. I hope to make it as well!

As long as I'm not driving behind you!

The way your GTR sat, sounded and launched out of corners on the putty rd cruise makes me want to do very bad things to my mortgage.

I drove the route today and checked out stuff and things, finished the day by taking my daughter to Jenolan Caves, I recommend that to anyone, the drive along Jenolan Rd is stupid fun :P

I cheated and took the Great Western HWY home because i thought it would be quicker, bloody road works, took longer than the Bell Line :)

Agreed, just when you think your GTR looks good driving along, you see GTRsean's one on the road :P

Lol you guys are too much. 5 years of ownership will do that!

She's good from a far but far from good body wise, but mechanically though....... :).

Hope to catch up with you lot and others soon.

i should be in on this one too guys just hope ill have the younger auto box swapped by this cruise so i can not have to worry about giving it a squirt thru bells line... keep me posted mark...... and congrats on the exec positions champ...... hope to see all u guys there for this one

The way your GTR sat, sounded and launched out of corners on the putty rd cruise makes me want to do very bad things to my mortgage.

Haha, true, I ended up with a 26/30 combo in my 31 lol.

Is it NSW members only or SAU members only? Cause I'm not a member of the specific NSW group.

Edited by Silhouette-R

http://www.skylinesaustralia.com/forums/Me...ml#entry4439337

If you cant open this link you are not a SAU NSW member, if you would like to become a member fill out this form SAU NSW Membership Form

PM an Exec member if you have any questions or need help

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...