Jump to content
SAU Community

Recommended Posts

I'd like some wheels with legal rubber for a gtr, preferably stock or 17's or 18's.

How much would i be looking at?

Hey. My name is Paul.

I have a set of Work Miester S2 rims for sale with rubber. I use to own a 1994 R33 GTS-T going back a few years. When I sold the car I removed the rims as I would have lost to much money selling the car with the rims. I recently purchased a Mitsubishi Legnum VR4 and the rims specs are not really going to suit my ride.

Anyway, the specs are as follows: Front: 18" by 8" , P.C.D 114.3 , Offset +35 , Rear: 18" by 9" , P.C.D 114.3 , Offset +38.

I'm not sure if the rims are going to suit your ride cause I have heard that GTR's must run same rim and tyre width front and back. The rims are fitted with Falken ZR rubber ( 235/40 front and 265/35 rear ). About 80% tread all round.

The rims are in as new condition with no defects/scratches as they didn't spend much time on my Skyline. They have spent most of their life wrapped in old bed sheets in storage. If they were suitable for my VR4, I wouldn't be selling them.

The complete package set me back $4900. Asking price is $3000 due to the fact that they are still in A1 condition.

I have attached photo of my old Skyline with rims fitted.

Let me know if your interested. If not, tell your mates.

Good luck with the search for rims for your beast.

post-60138-1235290611_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...