Jump to content
SAU Community

Recommended Posts

hi all,

i did a quick search and couldnt find exactly what i was after.....so i thought i would quickly post something up in here...

Ok have a S2 r33.....rb25det......so u know what ur workin with....and its auto

wantin to put a BOV on it....?? is this ok/safe to do?? i have been told about stalling problems by doin so?? or do i simply clean out my AAC out and all that to stop that???

so yeah, jus finding out if its all ok to install one and that i wont have any problems with it...

let me know

Cheers

Link to comment
https://www.sau.com.au/forums/topic/258106-bov-on-an-auto/
Share on other sites

yeah it will stall....

even with a full block off plate in the bov (for fulleh sik flutterz) it will stall.

at low rpm, like braking to turn a right angle corner across lanes slow speed etc. aftermarket bov or blocked bov will stall with the auto.....

so.. what to do?

grab a piece of metal, thicker than a coke can preferably.

grab the bov gasket, and cut metal to shape. Im using some .5mm thick aluminium plate.

so cut to shape, drill 2x bolt holes, then with smaller drill bit drill a couple of small airflow holes - circular like in the centre for some minor airflow

install nice and tight

test drive, you'll still have the bov, but it will flutter a bit, boost feels "tighter" (?),

because it isnt entirely blocked off it wont ever stall but sounds pretty cool (just like a $200 aftermarket bov, tried that) and boost pressure seems to be slightly more "on tap" than previously

wife loves it, hated it when she stalled it, so I drilled the little holes in the middle of the block off plate and now it doesnt stall but flutters very nicely indeed :P hektic-br0

Link to comment
https://www.sau.com.au/forums/topic/258106-bov-on-an-auto/#findComment-4438876
Share on other sites

ahh ok cool....so jus get a blanking plate...and install one of them....but make sure i put some small holes in the middle of it so it has some air flow to stop the stalling???

yes!!

coke can will do, but thicker metal seems less dodgy to me :P

my centre-drilled bov block off plate is nicely filed and machined, 30min home project after a few bongs ey? !

Link to comment
https://www.sau.com.au/forums/topic/258106-bov-on-an-auto/#findComment-4438884
Share on other sites

hi

i am confused what you want to do?

a) make the car make bov noises?

b) fit a different bov?

c) make it flutter ?

if a, fit a pod filter, the std GTST already has a bov

if b, change the bov to a different one, just dont go for an AMTO venting one, that will make the car stall

if c, block the std bov off as Tangles has said, that will make it surge and flutter

the stalling occurs when using an AMTO setup, that is, you dump the bov'd to the atmosphere

Link to comment
https://www.sau.com.au/forums/topic/258106-bov-on-an-auto/#findComment-4438905
Share on other sites

on auto paul even with full plumback ater-market bov it will stall

with blocked bov it will stall

only ever occasionally but will do

so you do the bov backing plate, put some small holes thru the centre of it, and it wont stall, but will be like option ©

Link to comment
https://www.sau.com.au/forums/topic/258106-bov-on-an-auto/#findComment-4438956
Share on other sites

Brendo, you FAIL :thumbsup:

Blocked bov, havent stalled it yet! Rev's hunt if i am WOT thru 1-3 then stomp on the brakes(eg, fwy :laugh: )

i blocked mine to see if my FMIC would make good sounds, its shit, so unblocking it.

even if it does stall, if you can drive with webbers, you can drive a car with an atmo or blocked bov

Link to comment
https://www.sau.com.au/forums/topic/258106-bov-on-an-auto/#findComment-4439232
Share on other sites

Had no probs on the rally car with atmo BOV and it runs AFM. Used to with the old Blitz but changed it to a GFB Stealth and set to full atmo and no probs. Used to stall with the blitz as the piston wasn't closing so had to continually stab the throttle when braking to a stop. Was no probs though.

Was thinking of taking the Stealth off the Mazda to put on the GTR cos you can vent just enough air back to the inlet to stop the stalling but still get the sound of the atmo BOV. Dunno yet if I'll do it but might be fun for a while, I do miss the sound it makes.

Link to comment
https://www.sau.com.au/forums/topic/258106-bov-on-an-auto/#findComment-4439898
Share on other sites

Guest jaysiin001

i have been told stalling issues will occur.

however i have a megasonic on my r33 manual. it does not stall.

it only stalls if i have the a/c going and when i change gears. but, if i change gears at a normal pace it stays alive. but it i change gears slow and let the revs go down, it will stay down and stall.

Link to comment
https://www.sau.com.au/forums/topic/258106-bov-on-an-auto/#findComment-4439963
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
×
×
  • Create New...