Jump to content
SAU Community

Recommended Posts

just wanting to know where can i get a keypad car alarm installed ( i think its one of those keypads where u gotta punch in a key code or car wont start sorta thing) an how much it would cost or ... be looking at? if anyone has sorta idea, or perhaps know of a site that they can link. any info would be appreciated, thnx.

Link to comment
https://www.sau.com.au/forums/topic/258345-keypad-car-alarms/
Share on other sites

I have had a code pad in my car for 4 years,

I cannot fault the security it provides, and the fact you have to type in the code everytime is not annoying,

as it is peace of mind.

Highly recommend getting one,

Try true blue alarms

the ones ive read about use the exisiting one.

Just works together with the alarm.

SO im guessing pressing the remote turns off the alarm, sensors and imb. However if you turn on the car without entering in the keypad after i think 5 seconds the car will stall out.

But im sure theres many ways of doing it. For example making the keypad responsible for turning of the imb. So u dont enter in the code the car wont start.

Im pretty sure i saw a link to buying these things... ill try and find it. If i can ill edit this post and put the link.

EDIT: Yep im cool! i found it. Cost 125!. This one looks like it comes with its own imb. circuit. and they are quoting 60 dollars to install... too bad there over east... Group buy anyone? ;)

http://www.nissansilvia.com/forums/index.p...owtopic=361351#

A quick explanation....

This system will work with any vehicle, any alarm, even vehicles with turbo timers!!!

Basically the system will automatically arm 1 min after the ignition is switched off.

You can also have it set up for Anti-Hyjack mode where if you open the drivers door (even if the cars running) if you do not enter the pin number within 5 mins it will kick the immobiliser in and shut down the car. So if someone pulls you out of the car and drives off, they will only get as far as 5 mins down the road and then they will not be able to start the car again unless they have your pin number B) which is pretty dam cool.

Edited by br3ndan

Yea i currently have the Autowatch Alarm system with Immobiliser, motion sensor, etc etc, So How much does it Cost to get one, have it installed, were is it to be located? and where can i get this done :( kthnxbai

Got mine done thru San Diablo alarms but i think he's sold his business already. It's a backyard job so wouldn't really recommend. Guy never fixed an alarm for a R34 Series 2 and blamed my car was a bitch to install - pfffttttt talk about professionalism. Took longer than expected and he overcharged me as well.

Would advise you guys to heard to Alberts Myaree. Went to there to sort out a initial wiring problem from the first installation. Forgotten the guy's name but the guy who attended to me is the only alarm specialist there and he knows his shit !!

Total for the alarm, sensors, keypad and boot release comes from the first install to approx $650 if i'm not mistaken. Had to spend another $80 4 months later to replace a module - the San Diablo guy installed the module where rain water will run thru hence it started to give out false alarm (wat a noob !!)

Having said that, if you already have an autowatch alarm adding the keypad will prob. be less than $200. Just ask around.

Edited by hotchoc
san diablo??? was that the guy with the dodgy ford panel van that used to do call outs?

p.s. so do autowatch do keypads aswell?

ford wagon u mean ?? yeah that's the one i think

yeah autowatch do keypads. i have one atm : )

i'll take a pic for you guys tmr

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...