Crans Posted February 24, 2009 Share Posted February 24, 2009 I have finally found a cheaper dyno i want to buy. Will read up to 360hp and around 400nm of torque. It is upgradeable past these limits and if all goes well i would do this upgrade. Before I slap the money down just wanted to know how much interest the would be for very reasonable priced dyno access for diagnostics and tunning? I will have the equipment for Nistune and shortly straight remaps. Hire the dyno and do your own tuning or let my tuner do it. We have a Motec Lambda meter and will be looking into a knock box aswell. Will also then look into getting tuning equipment for PFCs and other ecu's. Tell me your thoughts. I think it would be a great service for the backyard DIYers Link to comment https://www.sau.com.au/forums/topic/258419-dyno-hire-how-much-interest/ Share on other sites More sharing options...
bubba Posted February 24, 2009 Share Posted February 24, 2009 Going to need to read a LOT more than 360hp to be of any use to anyone other than stock turbo people. Link to comment https://www.sau.com.au/forums/topic/258419-dyno-hire-how-much-interest/#findComment-4442784 Share on other sites More sharing options...
Crans Posted February 24, 2009 Author Share Posted February 24, 2009 Its atleast 250kw+ so thats plenty for alot of people. I plan to upgrade the computer system asap so it will read alot higher. But also good for diagnostics not just power runs. The actual physical hardware upgrade is only needed for hold higher loads and not straight power runs Link to comment https://www.sau.com.au/forums/topic/258419-dyno-hire-how-much-interest/#findComment-4442793 Share on other sites More sharing options...
bubba Posted February 24, 2009 Share Posted February 24, 2009 Basically, 250rwkw is what most people are making (who don't still have stock turbos), my stag is making almost that and my 32 will be making a lot more than that soon. It's a great idea but you will need to look at getting the upgrades asap.. no point in offering people tuning facilities if they can't make full use of them Is it a 4wd dyno? if not, that counts out anyone with 33/34gtrs and Stageas. Who is "your" tuner? what does he have experience with? (engines and ecu's). Link to comment https://www.sau.com.au/forums/topic/258419-dyno-hire-how-much-interest/#findComment-4442838 Share on other sites More sharing options...
Crans Posted February 24, 2009 Author Share Posted February 24, 2009 Its only 2wd. And yes will look at doing the computer upgrade as soon as i can. My friend is the tuner. He has experience working with Nistune/remaps and also motec's(race/tarmac rally cars) He does all the work on my cars apart from the tunning which i do but with his guidance. I'm mainly aiming this for now at people on a budget but still want to do thing right. Not just skylines. 180's, silvias. Also looking at remaps for fords/holdens as i've worked with them previously and the software wasn't too bad apart from the lack of real time tunning but that can be figured out with a moates emulator which i plan on getting. After the upgrade would then like to get software for newer fords and holdens. But for now just want to start out slow and go with what i know. Link to comment https://www.sau.com.au/forums/topic/258419-dyno-hire-how-much-interest/#findComment-4442888 Share on other sites More sharing options...
Pattygtst Posted February 24, 2009 Share Posted February 24, 2009 i agree you really need more for power and torque, that counts me out i am above both of those. Link to comment https://www.sau.com.au/forums/topic/258419-dyno-hire-how-much-interest/#findComment-4442898 Share on other sites More sharing options...
Wogan Posted February 24, 2009 Share Posted February 24, 2009 depending on location and price, i'd probably use it. My final tune i got done was on a 40 degree day, so i'd be interested to see how much the heat cost me on my power run. Link to comment https://www.sau.com.au/forums/topic/258419-dyno-hire-how-much-interest/#findComment-4442928 Share on other sites More sharing options...
Crans Posted February 24, 2009 Author Share Posted February 24, 2009 (edited) As i said computer system will be upgraded asap i want handling for minimum 450rwkw. Dyno will be located in Balga and probably looking around the $50 - $60 per hour range I'm not after big earning just want my own dyno as i want to do all tuning on my cars my self and for friends. If i make enough money to pay it off and upgrade then i will be happy as. Also quite happy to let it be used for a dyno day and community type things for free(Beer would be nice Tune up session before drift/drags that sort of thing. Oh and really wanna get working my mine and my friends banshees on it. Jetting the cards is a complete bastard having to take it out and test after every change. Would be handy for run ins aswell. I could rebuild 10 banshee engines in the time it takes to do the run in Edited February 24, 2009 by Crans Link to comment https://www.sau.com.au/forums/topic/258419-dyno-hire-how-much-interest/#findComment-4442949 Share on other sites More sharing options...
gazza750 Posted February 24, 2009 Share Posted February 24, 2009 hope you realise all the hassles you will have from your local council regarding noise etc you will have to build a dyno specific room with sound proofing etc as it will be in a residential area noise abatement laws are fun In City Of Gosnells only 1HOUR per day permitted of noise not considered as every day noise Found all this stuff out because my neighbour is a drummer and no more than 1 hour per day between 9 a and 4 pm is permitted NO abnormal noise l outside those hours is permitted So I really think you will need to contact the City Of Stirling to find out what their noise policy is Link to comment https://www.sau.com.au/forums/topic/258419-dyno-hire-how-much-interest/#findComment-4443294 Share on other sites More sharing options...
R DIRTY 3 Posted February 24, 2009 Share Posted February 24, 2009 hope you realise all the hassles you will have from your local council regarding noise etcyou will have to build a dyno specific room with sound proofing etc as it will be in a residential area noise abatement laws are fun In City Of Gosnells only 1HOUR per day permitted of noise not considered as every day noise Found all this stuff out because my neighbour is a drummer and no more than 1 hour per day between 9 a and 4 pm is permitted NO abnormal noise l outside those hours is permitted So I really think you will need to contact the City Of Stirling to find out what their noise policy is Not to mention insurances. Property and Personal. Link to comment https://www.sau.com.au/forums/topic/258419-dyno-hire-how-much-interest/#findComment-4443296 Share on other sites More sharing options...
Crans Posted February 24, 2009 Author Share Posted February 24, 2009 We have a big shed at would be prepared properly. And have already started looking into required insurance. Link to comment https://www.sau.com.au/forums/topic/258419-dyno-hire-how-much-interest/#findComment-4443401 Share on other sites More sharing options...
autoworx Posted February 24, 2009 Share Posted February 24, 2009 big shed + perth heat + cheap install = sad sad dyno the cost of the dyno is not the issue with running the dyno , a decent install if you want to be able to run your dyno frequently during the day will set you back 50k minumum for a decent cell setup with fans , extraction and sound proofing . on top of that commecial rents , insurance , public liability and indemnity etc etc etc . plus if its not a dyno dynamics no import guy cares anymore and no 4wd cuts out a lot of work also. Link to comment https://www.sau.com.au/forums/topic/258419-dyno-hire-how-much-interest/#findComment-4443513 Share on other sites More sharing options...
Mr_GaZZa Posted February 24, 2009 Share Posted February 24, 2009 lol @ the people thinking it cant read your cars hp!!!! i bet a good 9.9/10 of you would be lucky to get close to that max sounds alright.. but all depends on value and what autoworx said **big shed + perth heat + cheap install = sad sad dyno** Link to comment https://www.sau.com.au/forums/topic/258419-dyno-hire-how-much-interest/#findComment-4443531 Share on other sites More sharing options...
r33-ml Posted February 24, 2009 Share Posted February 24, 2009 im new to this so my car is pritty stock and needs a tune .. if you have sum1 to tune it i would use it Link to comment https://www.sau.com.au/forums/topic/258419-dyno-hire-how-much-interest/#findComment-4443539 Share on other sites More sharing options...
gazza750 Posted February 24, 2009 Share Posted February 24, 2009 (edited) lol @ the people thinking it cant read your cars hp!!!!i bet a good 9.9/10 of you would be lucky to get close to that max * my stock unopened R32 GTR makes 342 @wheels and mine would be one of the stockest GTR's in Perth so i am sure 75% of the lines on here will make 350 here is a sample from MEMBERS area 6 out of the ten make 0ver 350 then all the non member cars you will find 350 hp @ wheels is considered very low these days SAUWA Top 10 Outright Power 1: Gav - DynoDynamics - 93 R32 GTR (2.8L) - BP98 - 574rwhp 2: Mr Keets - DynoDynamics - 89 R32 GTR - BP98 - 430rwhp 3: Ossie21 - DynoDynamics - 95 R33 GTS-t - BP98 - 407rwhp 4: bnr#@ - DynoDynamics - 92 R32 GTR - BP98 - 381rwhp 5: R33GTRKid - DynoDynamics - 97 R33 GTR - BP98 - 380rwhp 6: Pattygtst - DynoDynamics - 96 R33 GTS-t - BP98 - 364rwhp 7: gazza750 - DynoDynamics - 93 R32 GTR - BP98 - 342rwhp 8: Topaz - DynoDynamics - 93 R32 GTR - BP98 - 331rwhp4 9: Pal - DynoDynamics - 94 R33 GTS-t - BP98 - 307rwhp 10: inthisglass - DynoDynamics - 96 R33 GTS-t - BP98 - 300rwhp Edited February 24, 2009 by gazza750 Link to comment https://www.sau.com.au/forums/topic/258419-dyno-hire-how-much-interest/#findComment-4443546 Share on other sites More sharing options...
Crans Posted February 24, 2009 Author Share Posted February 24, 2009 I am only looking at running the dyno 1 day a week + weekends if needed so in no way a full time job. Its something i love and would like to help otheres out with Who said anything about a cheap install?? It might be DIY but with a boilermaker in the family(brother) who was worked for years on commercial sheds + Old but still working commercial air con things would be quite comfy Sounds proofing isnt a big deal neither are extractor fans. There are plenty of people with lightly modified cars that are no where near 360hp. And im guessing alot of them have never had there cars tuned either but would like to.(Put off by hugh costs) We are also planning a custom interceptor air fuel controller similar to the apexi safc but with full 3D mapping. I am also working on an incar computer system purely for engine monitoring and datalogging with touch screen interface if needed. Currently in development in my 32 gtr. Also in the first stages of planning is modifying the firmeware of the stock ecu's to bring in ignition cut and 0kph rev limiter(Launch control). Sobasically these are all hobbies of mine that i want to share round and help people with. If any one has a big shed with no near by houses i would gladly chuck the dyno in there if it made it easier Link to comment https://www.sau.com.au/forums/topic/258419-dyno-hire-how-much-interest/#findComment-4443570 Share on other sites More sharing options...
Kaido_RR Posted February 24, 2009 Share Posted February 24, 2009 would be interested in doing some power-runs and quick editing of my current map (pfc) Link to comment https://www.sau.com.au/forums/topic/258419-dyno-hire-how-much-interest/#findComment-4443651 Share on other sites More sharing options...
Mike__ Posted February 24, 2009 Share Posted February 24, 2009 (edited) sounds like a great idea hope it all works out for ya definetly be interested especially being 10min away Edited February 24, 2009 by Mike__ Link to comment https://www.sau.com.au/forums/topic/258419-dyno-hire-how-much-interest/#findComment-4443875 Share on other sites More sharing options...
R34 Posted February 24, 2009 Share Posted February 24, 2009 Sounds good Will you be able to do any tuning on a DR30? Looked at Nistunes site and they don't list anyting for the FJ20 Link to comment https://www.sau.com.au/forums/topic/258419-dyno-hire-how-much-interest/#findComment-4444186 Share on other sites More sharing options...
Crans Posted February 24, 2009 Author Share Posted February 24, 2009 I'll have to find out about the FJ20. You may be able to use a ca18/sr20 ecu depending on sensors used. Link to comment https://www.sau.com.au/forums/topic/258419-dyno-hire-how-much-interest/#findComment-4444300 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now